User manual MIO C230S

[. . . ] 9 Using the Device Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting the Car Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Operating Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Turning On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Repeat each time to complete the calibration process. The "Change Language" screen appears. Tap the left/right arrow button to button. Then, tap the The "Date&Time" screen appears. Tap the appropriate arrow button to select the time zone, date, and time. You can now use your device. 4 5 6 8 1. 3 Using Your Device in a Vehicle Using the Device Holder CAUTION: Select an appropriate location for the device holder. Never place the holder where the driver's field of vision is blocked. If the car's windshield is tinted with a reflective coating, an external antenna (optional) may be needed to route the antenna to the top of the car through a window. When closing the car window, be careful not to pinch the antenna cable Use the device holder to fix your device in a vehicle. Make sure that the GPS antenna has a clear view of the sky. Note: To remove your device from the holder, slightly push the tab of the holder to release it. To release: Connecting the Car Charger The car charger supplies power and charges your device at the same time. If the battery is fully charged, you can use the battery power without connecting the charger. If you don't want to drain the battery power, you can keep the charger connected while in a vehicle. CAUTION: To protect your device against sudden surges in current, connect the car charger only after the car engine has been started. 9 1. Connect one end of the car charger to the power connector of your device. Connect the other end to the cigarette lighter in the car to power and charge your device. The indicator on the car charger lights in green to indicate that power is being supplied to your device. CAUTION: For optimal performance of the lithium battery, take note of the following: Do not charge the battery where the temperature is high (e. g. There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged. If you will not use the product for a long period of time, be sure to fully charge the battery at least once every two weeks. Over discharge of the battery can affect the charging performance. NOTE: Your device can also be charged when it is connected to a desktop computer via the USB cable (purchase separately). If you intend to charge your device in this way, turn off your device so that it takes less time to charge the battery. To 1. 4 Operating Basics Turning On and Off For normal operation, turn off the device by briefly pressing the power button. The device enters a suspended state. When you next briefly press the power button, the system resumes. [. . . ] The voltage requirements are found on the product case and/or packaging. Do not use the charger if the cord becomes damaged. 19 Do not attempt to service the unit. Replace the unit if it is damaged or exposed to excess moisture. About the Battery Use a specified charger approved by the manufacturer. CAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. [. . . ]