User manual MITEL WIRELESS LAN STAND DATASHEET

[. . . ] DATA SHEET MITEL Wireless LAN Stand Wireless LAN Connectivity Offering Location-independent Service Mitel® Wireless LAN (WLAN) Stand is a unique accessory that allows you to put your Mitel IP phone where it's most convenient for you, and not be constrained to the area around your local area network (LAN) or Internet connection. [. . . ] You can connect a PC to the second port of the wireless IP phones to have wireless data access. So you can create your own wireless LAN in small installations! Integrated Voice Prioritization and Security Protocols To protect your data and privacy, all wireless transmissions can be encrypted with WEP or industrial-strength Wi-Fi protected access (WPA / WPA2) security. Wireless LAN Stand supports wireless multimedia (WMM) to ensure prioritization of voice (QoS) in a wireless network. Powering Options · Shipped with 48 V DC universal power adapter (100 ­ 240 V, 50 ­ 60 HZ) with a barrel connector on one end that plugs into the WLAN Stand, C8 connector receptacle on the other end · Requires a country-specific C7 power cord to be purchased separately Easy to Install Wireless LAN Stand easily snaps on and plugs into the back of the Mitel IP phone, replacing the regular stand that ships with the IP phone. It requires no additional ports, licenses or software options, and takes up no additional space on your desk. Power Consumption 5. 3 W (in addition to the power consumed by the phone that the Wireless LAN Stand is attached to) Wireless Standards 802. 11b, 802. 11g Features · Allows an IP phone to operate as both a wireless client or as an access point that supports voice, data and video over a wireless network · When operating as an access point, it provides wireless accessibility for up to six IP phones that have Wireless LAN Stand installed · Supports both 802. 11b and 802. 11g wireless standards · In access point mode, supports wireless multimedia (WMM) for wireless voice prioritization (QoS), and WPA / WPA2 for security on a wireless network · Provides wireless data access for the PC via the 10/100 LAN port in the IP phone · Eliminates Ethernet cabling for wireless IP phone clients · Supports two SSIDs for voice and data System Requirements · Mitel Communications Director (MCD), release 4. 0 or later · Mitel 5000 Communications Platform (CP), release 2. 4 or later · Mitel SX-200 IP Communications Platform (ICP), release 4. 0 UR5 or later · Mitel SIP phone software, release 7. 2 or later Supported IP Phones · · · · · · · · · · Mitel 5212 IP Phone Mitel 5215 / 5220 IP Phones (dual mode) Mitel 5224 IP Phone Mitel 5235 IP Phone Mitel 5312 IP Phone Mitel 5320 IP Phone Mitel 5324 IP Phone Mitel 5330 IP Phone Mitel 5340 IP Phone Mitel 5360 IP Phone Global Headquarters Tel: +1(613) 592-2122 Fax: +1(613) 592-4784 U. S. Tel: +1(480) 961-9000 Fax: +1(480) 961-1370 EMEA Tel: +44(0)1291-430000 Fax: +44(0)1291-430400 CALA Tel: +1(613) 592-2122 Fax: +1(613) 592-7825 Asia Pacific Tel: +852 2508 9780 Fax: +852 2508 9232 www. mitel. com For more information on our worldwide office locations, visit our website at www. mitel. com/offices THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate as of the date of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains. [. . . ] © Copyright 2010, Mitel Networks Corporation. [. . . ]