User manual MITSUBISHI 4G13

[. . . ] Push the bottom upward and gently lift out from the bottom. 1 Battery Level Indicator The Battery Level Indicator lets you know how much reserve power remains in your rechargeable battery. When the outline flashes, it is time to recharge. During fast charging, the entire indicator flashes. NOTE: Temperature extremes, poor charging/discharging practices, and improper storage reduce battery performance. Charging the Battery Make sure your battery is fully charged before using it for the first time. [. . . ] The Valid Address Map for Secret Number locations displays. Enter the address of the location you want to recall. Twelve digits of the Secret Number display. If you select an empty location, Empty displays. 18 Memory Edit Mode Alphabet Name and Number Edit 1. Press RCL, then enter the address for the location you want to change. The current label and/or the cursor appears and the Alpha Indicator Icon displays. Add characters using the Alphanumeric keys. Press TALK to indicate the displayed label is correct and display the phone number. Press TALK when you finish editing the label and phone number. Press STO to store the changes, or enter another address to store them in. Press TALK to edit another location or press END to return to Standby. Storing Erasing Memory Locations 1. Receive Only Disables all calls except for emergency calls. 3. Press END to save your selection and exit this mode. Call Restriction Interaction · 911 calls are always available. · · Manual DTMF is only available during No Restriction and Local Only. Dial Tone Dialing is unavailable during Recall 1-99, Recall 1-9, and Receive Only. 21 Features Automatic PIN Number If your service provider supports this feature, a PIN must be sent whenever you make a call. Rather than entering it each time, you can program the phone to send the PIN automatically. Programming the PIN 1. Press FCN 65, followed by your Security Code. If there is no current PIN, a line of dashes displays. To change the PIN, press TALK, then enter the desired 4-digit PIN and press TALK again. Press END to exit without changing the PIN. Enabling Automatic PIN Features With Automatic PIN enabled, the phone sends the PIN automatically when required by the cellular system. Press FCN 66 followed by the Security Code. [. . . ] In 1991 the Institute of Electrical and Electronics Engineers (IEEE) and in 1992 the American National Standards Institute (ANSI) updated the 1982 ANSI Standard for safety levels with respect to human exposure to RF energy. In March 1993, the US Federal Communications Commission (FCC) proposed adoption of the updated ANSI Standard. The design of your phone complies with this Standard. If you want to limit RF exposure even further, you may choose to limit the duration of calls and operate the phone in the most power efficient manner. [. . . ]