User manual MITSUBISHI 930SB

[. . . ] Use the attached specified cables with the Diamond Pro 930SB colour monitor so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Shielded captive type signal cable. Use of other cables and adapters may cause interference with radio and television reception. [. . . ] Sides In/Out (pincushion): Decreases or increases the curvature of the sides either inward or outward. Sides Left/Right (pincushion balance): Decreases or increases the curvature of the sides either to the left or right. Sides Tilt (parallelogram): Decreases or increases the tilt of the sides either to the left or right. Sides Align (trapezoidal): Decreases or increases the bottom of the screen to be the same as the top. rotate (raster rotation): Rotates the entire display clockwise or counterclockwise. Corner Correction: Allows you to adjust the geometry of the corners of your display – Top or Bottom. Tools 1 Moiré Canceler: Moiré is a wavy pattern which can sometimes appear on the screen. the pattern is repetitive and superimposed as rippled images. When running certain applications, the wavy pattern is more evident than in others. To reduce moiré, adjust the level by using –/+ CONTROL buttons. Linearity: This selection allows you to adjust the spacing of the area on the screen. The purpose of this control is to ensure that a one-inch circle is a true one-inch circle wherever it is on the screen. The best way to determine the vertical linearity is as follows: • Draw equally spaced horizontal lines using a drawing application that has a ruler. € Use the Vertical Balance control to adjust the lines near the top and bottom of your screen. ) control to adjust the spacing between the lines near the center and top of your screen. Convergence: Aligns all three colors (R, G, B) to form a single color (white). The purpose of this control is to ensure that a white line drawn on the screen is as crisp and clear as possible. ) control to adjust the alignment of the lines in the up/down direction. ) control to adjust the alignment of the lines in the left/right direction. GlobalSync Control: Eliminates picture impurities that may result from the earth’s magnetic field. While in the sub-menus (GLOBALSYNC, TOP LEFT, TOP RIGHT, BOTTOM LEFT or BOTTOM Y Information Display Mode: Indicates the current mode and frequency setting of the monitor. Monitor Info: Indicates the model and serial numbers of your monitor. [. . . ] The monitor should be installed close to a power outlet which is easily accessible. cORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE , SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. [. . . ]