User manual MITSUBISHI DX-NT430E

[. . . ] INSTALLATION AND OPERATION MANUAL MODEL DX-NT400E THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER. 1 OTHERS DIGITAL RECORDER ENGLISH Features DX-NT400E Digital Recorder Owning to a WEVELET method, high picture quality recording of more than 450 lines for the horizontal resolution and extended recording time are realized. The DXNT400E has 5 user selectable recording picture grades and 12 recording time modes. The DX-NT400E also has a built-in 4 camera multiplexer with motion detection per input. [. . . ] Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select "IM-CHECK PLAY" in the <HDD SETTINGS> screen. Display the desired setting and determine such setting. Press the CLEAR button or the SET UP button. Select the HDD to execute alteration check and then start playback. Warning is also displayed for the portion where the recorded data is damaged for some reason. Operations 47 ENGLISH s HDD SETTINGS o HDD REPEAT PLAY <INITIAL SET UP/INFORMATION> (continued) When executing complex playback operations with the PLAY or REV. P button during alteration check, the "IMAGE MODIFIED" warning may appear. Execute alteration check during normal playback. s AUDIO RECORDING This item is used to simultaneously record audio along with the video. When recording audio, the continuous recording time becomes shorter than when recording only video. <INITIAL SET UP/INFORMATION> HDD SETTINGS >>AUDIO RECORDING OFF REAR TERMINAL SETTINGS COMMUNICATION PORT SETTINGS INFORMATION/SERVICE PASSWORD LANGUAGE SELECTION IMAGE MODIFIED( 1 2 3 ) o SEQUENTIAL PLAY This item is used to make backups of the video recorded with this unit to an analog video recorder etc. while playing back the video of each camera in the single screen display. The playback order and time of each camera will be the order of the recorded video. <HDD SETTINGS> HDD REPEAT REC MAIN HDD REPEAT REC SUB HDD REPEAT PLAY IM-CHECK PLAY >>SEQUENTIAL PLAY Setting (default: "OFF") "ON": Records video and audio. "ALARM": Records video and audio during alarm recording and emergency recording. "OFF": Does not record audio. 1. Press the SET UP button } <SETTINGS> } Select "AUDIO RECORDING" in the <INITIAL SET UP/INFORMATION> screen. Display the desired setting and determine such setting. Press the CLEAR button or the SET UP button. ON OFF OFF OFF OFF When setting "AUDIO RECORDING" to "ON, " a speaker display ( ) appears next to <ESTD REC> in the <RECORD SETTING> and <REC MODE A> to <REC MODE D> screens. Setting (default: "OFF") "ON": Executes the sequential playback in the single screen display. "OFF": Does not execute the sequential playback in the single screen display. Sequential playback is executed at a playback interval of 25P. 1. Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select "SEQUENTIAL PLAY" in the <HDD SETTINGS> screen. Display the desired setting and determine such setting. Press the CLEAR button or the SET UP button. Press the SPLIT/SINGLE button to display the single screen display and then press the +, button to display the recorded video. Sequential playback in the single screen display starts. Even when setting "AUDIO RECORDING" to "ON, " audio cannot be recorded under the following settings. Audio recording cannot be performed when "PPS" of "RECORD SETTING" for normal recording are all set to the value smaller than "0. 333P. " In this case, ( X) appears to the right of <ESTD REC>. When the "ALARM TYPE" during alarm recording is set as follows: "ALARM CH": "A-PPS" of all the cameras set for alarm recording are set to the value smaller than "0. 333P. " "ALARM PLUS": "PPS" and "A-PPS" of all the cameras set for normal recording and alarm recording are set to the value smaller than "0. 333P. " The recorded audio may be interrupted while playback depending on the recording settings. When performing sequential playback for video with long recording intervals, the video of the highest camera number selected for recording is played back for the longest time. 48 o MODE OUT 1 to MODE OUT 5 These items are used to output the status of this unit from the MODE OUT terminals on the rear panel. [. . . ] Undvik att skaka eller stta denna enhet hftigt. Om man gr sdant speciellt under tiden enheten r strmfrd eller under tkomst till hrdvaran kan fel uppst i enheten. Drag aldrig ut stickproppen till ntstrmmen under inspelning/tergivining eller under tiden enheten r strfrd. Det rekommenderas att lta underhlla enheten minst en gng varje r, s att eventuellt fel kan tgrdas s tidigt som mjligt. Others 7 OTHERS SKYDDA STRMKABELN Others (Continued) (, ) - - , . . [. . . ]