User manual MITSUBISHI DX-TL4509E

[. . . ] DIGITAL RECORDER USERS MANUAL MODEL DEUTSCH THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER. 1 OTHERS NEDERLANDS ITALIANO ESPAÑOL DX-TL4509E DX-TL4509E(Z) FRANÇAIS ENGLISH Caution and care HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E. G. , MONITOR) NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates a safety hazard but can also cause extensive damage. PROTECT THE POWER CORD Damage to the power cord may cause fire or shock hazard. If the power cord is damaged, turn OFF the MAIN switch and carefully unplug the cord by holding the main plug. [. . . ] The available setting items are "Alarm" and "All. " Overwrite: Selects whether or not to overwrite the existed data. Auto Eject: Selects whether to eject media (CD/ DVD) automatically when the copy is over. Set the start, start/end, or end point of copy by specifying the date and time or the bookmark number. Start: Sets only the start point of copy. The data is copied from the specified start point as much data as possible with the remaining capacity of the media to be copied. Start/End: Sets the start and end points of copy. The data is copied as much data as possible with the remaining capacity of the media to be copied until the specified end point reaches. · To set the bookmark point, select "Bookmark" and then select the desired bookmark number. · To copy from the oldest recording time, select " C o p y S t a r t Ti m e . " To c o p y t o t h e l a t e s t recording time, select "Copy End Time. " Select "Calculate" to calculate the capacity of data to be copied. step4. step2. When using "End, " the copy cannot be executed unless the calculation of the capacity of data to be copied is completed. When using "Start" or "Start/End" and executing copy without calculating the capacity of data to be copied, the progress or the time of the copy may not be displayed correctly because the unit cannot determine the capacity of data to be copied. step5. Select "Execute. " · The copy starts. · To stop copy manually, select "Cancel" in the progress screen. The data which has been copied before cancelling is copied. "Alarm" appears for "From Group" when "Alarm Recording Area" is set to other than "0 %. " (System Menu Memory Data Management Setting for Main Memory) "LPA" appears for "From Group" when "Long Pre-Alarm Area" is set to other than "0 %. " (System Menu Memory Data Management Setting for Main Memory) Basic operations 19 Copying the recorded data (continued) Copy Data to Copy 2 Drive/Set Copy 2 Drive This item is used to copy the data to Copy 2 device by specifying only the start point. The point is specified by the date and time or the bookmark. The copy continues until the end point of the recording data reaches or the media to be copied becomes full unless the copy is stopped manually (when "FIFO Overwrite" is set to "Off"). This function is useful for making backup of the recording data. Before executing the copy, make sure that the Copy 2 device is connected and set in the <Add/Remove HDD Device> and <Add/Remove DVD/CD Drive> correctly. (System Menu Memory) User Menu 2 Copy step When copying the data to DVD while "Overwrite" is set to "On, " the unit clears the existed data of the disc before overwriting with new data. Note that clearing the data takes about 30 to 40 minutes. You cannot cancel operation during clearing the data of the DVD. When copying the data while "Copy Data" is set to "Alarm, " the unit performs copy operation, however, the data is not copied if there is no alarm recording data within the specified range of copy. In case of CD/DVD disc, the remaining capacity becomes low because only the management information is recorded. Do not use the disc which has been used on the personal computer, failed to be copied, or stopped during copying due to the power failure because they may cause malfunction of the unit. step3. 4 2 Copy Data to Copy 2 Drive step 3 1 + 2 Range of Copy steps 1, 2 step4. 4 Set Copy 2 Drive step1. Set the start time of copy. [. . . ] Click "Clear LOG6200 Warning" or press the E button. Click "Clear LOG5100 Warning" or press the E button. Click "Clear LOG5200 Warning" or press the E button. Click "Clear LOG5201 Warning" or press the E button. [. . . ]