User manual MITSUBISHI LDTV146

[. . . ] LCD FLAT PANEL HDTV MODELS LDTV-146 LDTV-152 OWNER'S GUIDE · · · · · For questions: - Visit our website at www. mitsubishi-presentations. com. - Call Consumer Relations at (888) 307-0349. For information on System Reset, please see the back cover. To order replacement or additional remote controls, e-mail us at Tsupport@mdea. com or call (888) 307-0309. [. . . ] · Maintain accurate ChannelView listings. If you have enabled the TV Guide Daily system, there is no need to set the clock; settings are grayed out and unavailable. Setup menu, Clock options Setup Menu Options Settings Clock Manual. Select either Applies or Ignore for Daylight Savings Time. Note: If using Manual, each time the time change occurs, you must open this menu and set the TV's clock ahead or back. Select either Applies or Ignore for Daylight Savings Time. After exiting the menus, tune the TV to an analog station on ANT 1 or ANT 2 carrying XDS data, typically a PBS station. Note: · With the Auto setting and Applies selected for Daylight Savings Time, the TV's clock adjusts automatically to daylight savings time. · The TV's clock will be reset if you tune to a channel sending incorrect time data. To prevent unwanted clock resets, first use the Auto method to set the clock from a channel sending the correct time, then change the method to Manual. With the hour highlighted, press repeatedly to change the hour and the AM/PM indicator. Press and hold to change the hour display quickly. With the minutes highlighted, press to change the minutes. Press and hold to change the minutes display quickly. With the year highlighted, press Eastern, Central, Mountain, Pacific, etc. to select the current year. Date (Manual option only) Time Zone Required for both the Manual and Auto methods. Daylight Savings Time Required for both the Manual and Auto methods. TV Menus 47 Setup Menu, continued Timer Use the Timer to set a time for the TV to turn on automatically. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the requested time, the TV will automatically tune to the designated channel. · · · · The TV clock must be set before you can use the Timer feature. TV Energy Mode must be set to Fast Power On to have the TV power on at the set time. To open the Timer menu, highlight the Timer icon in the Setup menu and press ENTER. [. . . ] THIS LIMITED WARRANTY DOES NOT COVER: a. Up to . 01% pixel outages (small dot picture elements that are dark or incorrectly illuminated). Cosmetic damage or any other damage where such damage is caused by unauthorized modification, alteration, repairs to or service of the product by anyone other than an authorized MITSUBISHI service center; physical abuse to or misuse of the product (or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner's Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MDEA, such as power surge damage caused by electrical system or damages caused by use of third party mounting brackets or stands. This limited warranty also excludes service calls where no defect in the product covered under this warranty is found, service calls related to unsatisfactory audio or visual reception or signal unless caused by a defect in the product that is covered under this limited warranty, all costs, expenses or any other damages arising from product installation, removal from or re-installation into custom installations or on wall mountings, or Warranty 93 set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness), other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable or satellite systems, or service of products purchased or serviced outside the U. S. A. [. . . ]