User manual MITSUBISHI LT-3020

[. . . ] Owner's Guide LCD Television Models LT- and LT- visit our website at www. mitsubishi-tv. com LCD Monitor 5 8 03. indd 1 5/8/2003, 3:02 PM RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] The TV will find and remember strong channels and skip the unused or weaker channels. DTV Note: If you have a DTV receiver connected, you will need to use that receiver's channel memorization system to memorize digital channels. Figure 9. Memorize Channels Menu MEMORIZE Menu (Figure 10) Stop memorization at any time by pressing CANCEL. Channels memorized prior to pressing CANCEL will stay in memory. After channels are memorized, you may select memorized channels in ascending or descending order by pressing the CHANNEL button on the remote control. Figure 10. Memorize Menu INPUT ASSIGNMENT Menu (Figure 11) INPUT ASSIGNMENT turns off unused inputs, turns them on again or changes the name of the input. If you turn an input Off, it will be skipped when you press DEVICE on the remote control. Choices are: ANT: On or Off COMPONENT-1, COMPONENT-2 Cycle through a list of preset names or Off INPUT-1, INPUT-2 Cycle through a list of preset names or Off PC MonitorLink (MONLINK) Cycle through a list of preset names or Off Figure 11. Input Assignment Menu 35 5/8/2003, 3:03 PM LCD Monitor 5 8 03. indd 35 SETUP Menu: Manually Setting the Clock Clock Setting (Manual) (Figure 12) The Clock Setting menu default allows the clock time to be set manually. To set the clock automatically, please see page . To set the clock manually, first select the current time, including AM or PM. Press hold or or to slowly adjust the time. Press and to quickly adjust the time. Figure 12. Clock Setting and Time (Figure 13) Set Day After manually selecting the current time, select the current day. ENTER for menu or to start MENU to return Figure 13. Set Day 36 LCD Monitor 5 8 03. indd 36 5/8/2003, 3:03 PM SETUP Menu: Automatically Setting the Clock Clock Setting (Auto) (Figure 14) Set the Clock Setting to Auto to automatically set the day and time using Extended Data Service (XDS) time data. This data is automatically retrieved when tuned to a PBS channel or other channel in your area that provides this service. Figure 14. Clock Setting (Auto) Time Zone (Figure 15) Select the correct time zone (Atlantic, Eastern, Central, Mountain, Pacific, Alaska, or Hawaii) for your area when Auto has been selected as the Clock Setting. Figure 15. Time Zone Daylight Savings Time (Figure 16) Select the Daylight Savings Time (DST) option that your state uses when Auto has been selected for the Clock Setting. Applies = uses DST Ignore = does not use DST The clock time and day will be set automatically after tuning to a channel carrying the Extended Data Service (XDS) time data (usually your local PBS channel). Figure 16. Daylight Savings Time 37 LCD Monitor 5 8 03. indd 37 5/8/2003, 3:03 PM SETUP Menu: Language, Front Button Lock Language (Figure 17) Display the on-screen menus in either English or Spanish (Español). The first time you powered On your TV, you were requested to select an on-screen menu language. If you choose to change the selection, all menu text will immediately switch to the language of your choice. Figure 17. Language / Idioma Front Button Lock (Figure 18) Disable controls on the front panel to prevent anyone from accidentally changing settings. [. . . ] Warranty service will be provided at an authorized MITSUBISHI service center, provided that your television is located within the geographic territory customarily covered by an authorized MITSUBISHI service center. You must either deliver or carry-in your television to an authorized service location at your own expense, and pay for any travel and/or transportation costs to and from your home. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. [. . . ]