User manual MITSUBISHI MDT551S

[. . . ] Index Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-2 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-3 Declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-5 Safety Precautions, Maintenance & Recommended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Only the selected upstream port is connected to the USB hub. Use the OSD screen function to select the appropriate upstream port. [When using an external computer] Connect the USB port (Standard A) on the computer and the USB upstream port (Standard B) on the monitor using a USB cable (commercially available). [When using an OPS-compliant computer] Install an OPS-compliant computer (connected internally). Connect a USB device to the downstream port of this monitor. Internal structure of the monitor's USB function Switch When using an OPS-compliant computer Upstream port Internal hub Downstream port When using an external computer USB USB devices (mouse, touch panel, etc. ) NOTE: · The USB hub function cannot control the monitor. Use CAT5 Tx BOX (option) and CAT5 Rx BOX (option) to control the monitor from a USB device. · Up to 5 hubs can be cascaded in the hub function of this monitor. Carry out operation check in advance even if you connect a device pursuant to the USB standards. English-29 P-9 Connecting the power cord to the monitor Connecting the power source Before making connections · Check that the main power switch is off. CAUTION: When an OPS-compliant computer is installed and the main power switch of the monitor is on, connecting the power source may cause the computer to power on, causing damage or breakdown of the operation system and the hard disc. The power outlet socket should be installed as near the equipment as possible and should be easily accessible. Fully insert the prongs into the power outlet socket. Don't plug and unplug the power cord repeatedly in a short time of period. · · · NOTE: Please refer to "Safety Precautions, Maintenance & Recommended Use" in this manual for proper selection of the AC power cord. Use the clamper to prevent accidental disconnection of the power cord. Clamper Main power switch Power cord (For EU) Clamper Power cord (For North America) English-30 How to Use Flow of How to Using U-1 Turning on all the connected devices Pages 32 to 33 U-2 Selecting the video input Page 34 U-3 Controlling the external devices Page 35 U-4 Selecting the OSD language RGB3, RGB4, and OPTION (CAT5) only Page 35 U-5 Auto-setup Page 36 U-6 Selecting the picture mode Page 36 U-7 Screen adjustment Page 37 U-8 Picture adjustment Page 37 Carry out as necessary U-9 Speaker setting Page 38 U-10 Volume and tone control Page 38 U-11 Schedule setting Pages 39 to 40 U-12 Remote control Pages 41 to 43 U-13 Setting the USB device Page 44 English-31 English U-1 Turning on all the connected devices 3. When the power indicator glows red, press the POWER button on the monitor. The power indicator turns green. Turning on external devices 1. Turn on the connected devices such as the computer and VCR. Turning on the monitor CAUTION: When an OPS-compliant computer is installed as an extension module, the computer automatically turns on and starts as the monitor is turned on. Don't turn off the monitor immediately after turning it on because the computer may be in the startup process. Select OPTION as the video input and wait for the operating system of the computer to complete the startup process. NOTE: If the computer doesn't reply to the monitor for about one minute, an error message "OPTION ERROR" is displayed. See the user's manual of your computer. Power button or 2. Turn on the Main Power Switch. The power indicator turns on green and the monitor turns on. The control buttons on the rear of the monitor and the wireless remote control don't work while the Main Power Switch is off (the power indicator is off). When using them, check that the Main Power Switch is on (the power indicator is on). Power button Wireless remote control Main Power Switch English-32 U-1 Turning on all the connected devices (continued) Power Management Function This function reduces the power consumption of the monitor when the keyboard or the mouse is not used for a fixed period even though the power of the monitor is on. [. . . ] · Check the monitor and your display card with respect to the compatibility and recommended signal timings. · If the displayed text is garbled, change the video mode to the non-interlace mode and use 60 Hz refresh rate. Image of component signal is greenish · Check to see if the DVD/HD input connector is selected. LED on the monitor is not lit (No green or red color can be seen) · Power Switch should be in the ON position and power cord should be connected. [. . . ]