User manual MITSUBISHI MR SLIM

[. . . ] For customers ÍNDICE Thank you very much for purchasing this Mitsubishi room air conditioner. To use this unit correctly and safely, be sure to read this operating instructions before use. Keep this manual carefully for later reference. Be sure to receive a guarantee card from your dealer and check that the purchased date and shop name, etc. [. . . ] If the unit was set to off with the remote controller before the shutoff of the main power, it will remain stopped even after the main power is turned on. If the unit was in the emergency operation before the shutoff of the main power, it will start operation, when main power comes on, in the same mode as the one set with the remote controller before the emergency operation. if the unit is operated in "I FEEL . " mode before power failure, the operation is not stored in the memory. " mode, the operation is decided by the initial room temperature at (re)start. Since the air conditioner has been shipped from the factory with the COOL mode saved in the memory for auto restart function, it starts cooling operation when the user turns on the main power for the first time after installation. 1 Close the windows and pull 2 Paste a heat shield film (gen- 3 Block the outdoor unit from didown blinds. This saves enduced and cooling efficiency Heat entering the room is reergy. Each time this button is pressed, the operation mode is changed in sequence: (I FEEL. After the operation mode is set once, the operation starts in the same mode as the one set previously from the next time by simply pressing the ON/OFF button. The humidity at which people feel comfortable When air contains too much moisture, people feel uncomfortable. humidity is related to temperature and wind. The humidity at which people feel comfortable is 60 % - 75 % RH in summer, 55 % - 70 % RH in winter. The room temperature is slightly lowered in this operation mode. When the ambient temperature is too high, the room temperature may not reach the set temperature since the unit operates to cool the room under a high load. Each time the button is pressed, the fan speed is (Low) (Med. When the AUTO mode is selected with the VANE button, the position of the HORIZONTAL VANE is automatically set to correspond to the operation mode for effective operation. Use the (High) notch to cool the room more. If the operating sound of the air conditioner disturbs your sleep, use the (Low) notch. Each time the button is pressed, the angle of the HORIZONTAL VANE is changed in sequence: (1) (2) (3) (4) (5) (SWING) (AUTO) Use the swing operation for the air flow to reach all corners of the room. Each time the button is pressed, the angle of the VERTICAL VANE is changed in sequence: (2) in the Use position (1) or COOL or DRY mode when adjusting to your requirements. Use the swing operation for the air flow to reach all corners of the room. [. . . ] To prevent the effects of a fluorescent lamp, keep as far apart as possible. Do not put an object around the air outlet of the outdoor unit. This may lower the capacity or increase the volume of the operating sound. If an abnormal sound is heard during operation, consult your dealer. [. . . ]