User manual MITSUBISHI MRCH1

[. . . ] Note: If the display flashes "Set Clock, " the remote controller will follow your settings for the weekday "occupied1" (or "Wake") time period until you reset the time and day. Press SET DAY, then select current day In "Auto" fan mode the equipment determines the optimal fan speed to meet the set temperature. Note: Selectable fan speed options may vary depending on your equipment. Drying: Remote controller directs indoor unit to remove moisture out of the air. [. . . ] when the system is set to "Auto , " the remote controller automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 2 degrees apart, depending how your remote controller was configured. Note: The "Auto" system setting may not appear, depending on how your remote controller was configured. The optional Portable Central Controller can manage temperatures of multiple split-zoning systems from almost anywhere on the property. The Portable Central Controller also works with other RedLINKTM devices used with other types of heating and cooling equipment. One Portable Comfort Control can adjust up to 16 zones on a single property. The outdoor air sensor also works with other RedLINKTM devices used with other types of heating and cooling equipment. To find a lost Portable Central Controller If you misplace a Portable Central Controller, press MORE, then FIND REMOTE. The Portable Central Controller will beep for two minutes to help you locate it. To set up/down airflow direction (vane control) If you would like to manually set the airflow direction, press MORE, then s or t to select the desired position, "Auto" or "Oscillate. Top and bottom positions may change after 1 hour to prevent condensation. Note: Airflow direction positions may vary depending on your equipment. Set a timer to automatically power off the indoor unit (if configured) Press MORE until "Power Off At" is displayed. Press s or t to set the time at which you would like the unit to turn off. This timer can be set up to 24 hours in advance. Depending on how this feature was installed, the indoor unit will either: A) Stay turned Off indefinitely until the user changes the system mode. B) Stay turned Off until the next scheduled period Example: If a room will be unoccupied at 10:00 PM, press MORE until "Power Off At" appears. To clear the "Power Off At" timer from the home screen, press CANCEL. Optimal Start: This feature eliminates the guesswork when setting your schedule. It allows the remote controller to "learn" how long your Split-Zoning System takes to reach programmed temperature settings, so the temperature is reached at the time you set. locked: To prevent tampering , features can be fully or partially locked. When a selected feature is locked, the word "Locked" is displayed on the screen for approximately 5 seconds. [. . . ] En fonction de la façon dont cette caractéristique a été installée, l'unité intérieure : A) Stay turned Off indefinitely until the user changes the system mode B) Reste éteinte jusqu'à la prochaine période programmée Exemple : Si une pièce sera vide à 22 h, appuyer sur MORE jusqu'à ce que « Power Off At » s'affiche. 0 = ARRÊT 1 = MARCHE This feature prevents users from changing the clock, current day and the schedule. 0 = ARRÊT 1 = MARCHE This feature prevents users from changing the Heat temperature setting above the selected temperature limit. 90 = 32° C (90° F) Temperature Limit 40-89 = 4 à 32° C (40 à 89° F) This feature prevents users from changing the Cool temperature setting below the selected temperature limit. [. . . ]