User manual MITSUBISHI PAC-YG31CDA 1.40

[. . . ] Mitsubishi Electric Air Conditioning Network System BACnetTM Interface: PAC-YG31CDA (Ver. 1. 40) Operation Manual Contents 1. Safety Precautions 2. System Requirements 3. System Configuration 4. Functional specification 5. Installation 6. Part Name and Functions 7. Initial Startup and Shutdown 8. System Setting Procedure 9. Site Adjustment . . . . . . . . . 1 . . . . . . . . . 2 . . . . . . . . . 4 . . . . . . . . . 6 . . . . . . . . . 16 . . . . . . . . . 20 . . . . . . . . . 22 . . . . . . . . . 22 . . . . . . . . . 33 Appendix1: Auto Log ­ In Confirmation Method Appendix2: Initial Value Appendix3: Correcting the system setting data when PC fails or is replaced. Please read this manual before using the unit. Please keep this manual for future use. 1. 40) Contents 1. Safety Precautions 2. System Requirements 2. 1 Requirements (system recommendations) 2. 2 Compatible Airconditioner 2. 3 Restrictions 3. System Configuration 3. 1 System Configuration Example 3. 2 Hardware Connection Diagram 3. 3 Group Configuration 4. Functional specification 4. 1 Communications protocol specification 4. 2 Object List 4. 3 Object and Management Item 4. 4 Service List 4. 5 Service list for every object 4. 6 Event service specification 4. 7 Function 4. 8 Setting functional list 5. Installation 5. 1 Pre-Installation Steps 5. 2 BACnetIF Set up 5. 3 BACnetIF Uninstall 6. Part Names and Functions 6. 1Window Elements 6. 2 Basic Mouse Operation 7. Initial Startup and Shutdown 7. 1 Before Startup 7. 2 Start up 7. 3 Shutdown 8. System Setting Procedure 8. 1 Start up [SetBACnet] 8. 2 Shutdown [SetBACnet] 8. 3 Window Elements 8. 4 Open/Close file 8. 5 Get/Put System Settings 8. 6 System Setting Procedure 8. 7 Setup for G-50A 8. 8 Setup for BACnet 8. 9 System Setup . . . . . . . . . 1 . . . . . . . . . 3 . . . . . . . . . 3 . . . . . . . . . 3 . . . . . . . . . 4 . . . . . . . . . 5 . . . . . . . . . 5 . . . . . . . . . 5 . . . . . . . . . 6 . . . . . . . . . 7 . . . . . . . . . 7 . . . . . . . . . 8 . . . . . . . . . 9 . . . . . . . . . 11 . . . . . . . . . 12 . . . . . . . . . 13 . . . . . . . . . 13 . . . . . . . . . 14 . . . . . . . . . 15 . . . . . . . . . 15 . . . . . . . . . 16 . . . . . . . . . 18 . . . . . . . . . 19 . . . . . . . . . 19 . . . . . . . . . 19 . . . . . . . . . 20 . . . . . . . . . 20 . . . . . . . . . 20 . . . . . . . . . 20 . . . . . . . . . 22 . . . . . . . . . 22 . . . . . . . . . 22 . . . . . . . . . 23 . . . . . . . . . 23 . . . . . . . . . 23 . . . . . . . . . 24 . . . . . . . . . 24 . . . . . . . . . 27 . . . . . . . . . 32 9. Site Adjustment . . . . . . . . . 33 9. 1 Site Adjustment . . . . . . . . . 33 9. 2 Tools for Site Adjustment . . . . . . . . . 34 9. 3 Step1: Test operation from Centralized controller G-50A . . . . . . . . . 34 9. 4 Step2: Initial Setting of BACnetIF . . . . . . . . . 35 9. 5 Setting Check . . . . . . . . . 36 9. 6 Step3: Test operation from BMS . . . . . . . . . 37 Appendix 1: Auto Log ­ In Confirmation Method Appendix 2: Initial Value Appendix 3: Correcting the system setting data when PC fails or is replaced. In this manual, Microsoft® Windows® XP Professional is called Windows XP. Trademarks MS, Microsoft, Microsoft logo, and Windows are registered trademarks and trade names of Microsoft Corporation. [. . . ] IP address of PC to which BACnetIF is set up is input. [127. 0. 0. 1] is input when set up to PC, as which BACnetIF and a setting tool are the same. Communication port number for the XML communication with BACnetIF. Communication port number for the FTP communication with BACnetIF. It is a destination folder of set information. Set the installation folder of BACnetIF. THE BACnetIF program is ended. [Save Settings As] [Exports] [Properties] [IP Address] [XML PortNo] [FTP PortNo] [Setup Path] [Exit] *1 When the installation folder of BACnetIF is specified, the set up information is reflected in BACnetIF. 8. 5 Get/Put system settings The [BACnetIF] menu contains the item that you forward the system set up information to BACnetIF, and acquires it from BACnetIF. [BACnetIF] menu [Get Settings] [Put Settings] Contents The system set up information is acquired from BACnetIF. (*1) The system set up information is forwarded to BACnetIF. (*1, *2) *1 Internet Protocol address at the forwarding destination (acquisition source) is set with Properties of the File menu. *2 Please restart BACnetIF, when a function and a system configuration are changed. BACnet IF reads setting information at once at the time of starting. 23 8. 6 System Setting Procedure The following is an explanation of the System Settings performed at Setting Tool. Setup for G-50A Step1: G-50A connection set-up Step2: Group configuration set-up Setup for BACnet Step3: BACnet communication set-up Step4: Notification set-up (COV, Event) System setup Step5: Expended function set-up 8. 7 Setup for G-50A Set the information of the air-conditioning system. 8. 7. 1 Register the G-50A Select the [G-50] Tab. G-50A registered is displayed on a screen. G-50A, which can be registered, is to ten sets. (1) Add G-50A Click the [Add] button. The [G-50] window will open Refer to 8. 7. 2 and 8. 7. 3 (2) Modify G-50A setting Select the [No. ] of G-50A . Refer to 8. 7. 2 and 8. 7. 3 (3) Delete G-50A Select the [No. ] of G-50A . The confirmation screen will open. (4) Reset data Click the [Reset] button. The confirmation screen will open. 24 8. 7. 2 G-50A NO. and IP-Address Set the number and IP-Address of G-50A connected to the system. Item No. (G-50A No. ) *1 Contents Set value Set the number of G-50A connected to the Default: Null system. [. . . ] *3) The group of LC serves as an item with an invalid attribute. *4) As for the operation mode of the group of LC, an attribute serves as ventilation fixation. *5) XXXX of an instance number consists of G50 number + group numbers. *6) BMS:Building Management System 39 Appendix 1: Auto Log ­ In Confirmation Method This chapter describes the procedure for confirming that the Auto login setting is validated. 1) Select [User account] on [Control Panel]. [. . . ]