User manual MITSUBISHI PLFY

[. . . ] DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. When using the projector in Europe: COMPLIANCE NOTICE This Projector complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/ EEC. The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on smallscale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. WARNING Use the attached RGB cable or RS-232C cable with this equipment so as to keep interference within the limits of an EN55022 Class B device. Please follow WARNING instructions. EN - 2 Contents ENGLISH Important safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] * 4: Available only when the input signal is TV60, 480i. * 5: Setting range differs depending on the input signals. Basic operation Several settings can be adjusted using the menu. Example : Auto power off time setting 1. Press the OFF. or button to select AUTO POWER OFF OFF AUTO POWER ON AUTO POWER OFF XGA60 IMAGE 5. Press the off time. or button to adjust the auto power OFF 30 min 2. Press the opt. or button to select INSTALLATION. XGA60 AUTO POWER ON AUTO POWER OFF INSTALLATION 6. Exit the menu by pressing the MENU button several times. Important: · When the button doesn't function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again. · After selecting the items marked with , press the ENTER button. 3. Press the ENTER button (or opt. XGA60 OFF OFF INSTALLATION AUTO POWER ON AUTO POWER OFF EN - 15 ENGLISH CONTRAST BRIGHTNESS CineRichColor *1 sRGB COLOR TEMP. Choose ON when using the projector mounted on INSTALLATION AUTO POWER the ceiling. OFF ON AUTO POWER · The projector is in the stand-by mode when the OFF OFF lamp is off. Use the remote control to turn on SPLASH ON SCREEN the lamp. BACK COLOR BLUE AUTO POWER OFF. . . . . . . . . . . . . . . . Use to set the time elapsed before the projector STANDARD LAMP MODE enters the stand-by mode when there is no signal IMAGE OFF REVERSE input from the source. Choose ON to display the splash screen when the power is turned on. Use to select the background from among BLUE and BLACK, which will be displayed when there is no signal input from the source. Use to change the brightness of the lamp. When LOW is chosen, the lamp brightness is kept low and the projector operating noise is reduced, resulting in a longer lamp replacement interval. · When the lamp mode is switched, the projected image may flicker. · Do not change the setting of LAMP MODE frequently. [. . . ] 2. 9 kg 114 inch (2. 9 m) +41ºF (+5ºC) - +95ºF (+35ºC), 30 - 90% Not included protrusion. PBPR/CBCR:0. 7 Vp-p Kensington Lock This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below. [. . . ]