User manual MITSUBISHI PLFY-P-NCMU-E

[. . . ] Use the attached RGB cable and the shielded LAN cable with this equipment so as to keep interference within the limits of an FCC Class B device. This apparatus must be grounded. When using the projector in Europe: COMPLIANCE NOTICE This Projector complies with the requirements of the EC Directive 2004/108/EC "EMC Directive" and 2006/95/EC "Low Voltage Directive". The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterized by their connection to the public low voltage power supply system. DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. [. . . ] Select ON when you set the projector at the ceiling. · When the lamp is off, the projector is in standby. Use the remote control to turn on the lamp. Selects a desired timer setting until the projector enters the standby mode when there is no signal input from the source. Select ON to display the splash screen when the projector is powered on. Selects the background color that is displayed when there is no signal input from the source. Select this setting when you want to view images from the front with the projector set on the floor. Select this setting when you want to view images from behind the screen with the projector set on the floor. Select this setting when you want to view images from behind the screen with the projector set at the ceiling. Select this setting when you want to view images from the front with the projector set at the ceiling. Resets LAMP TIME. opt. INSTALLATION WALL SCREEN LAMP MODE STANDBY MODE AUDIO INPUT AUTO POWER ON AUTO POWER OFF ON WALL SCREEN BEIGE STANDARD STANDARD AUTO OFF OFF ON BLUE OFF OK LAMP MODE LOW SPLASH SCREEN BACK COLOR IMAGE REVERSE LAMP TIME RESET STANDARD STANDBY MODE LOW AUTO AUDIO INPUT AUDIO 1/AUDIO 2 MIX AUTO POWER ON ON/OFF AUTO POWER OFF SPLASH SCREEN BACK COLOR OFF/5-60 min ON/OFF BLUE/BLACK OFF MIRROR IMAGE REVERSE INVERT MIRROR INVERT LAMP TIME RESET OK · By default, the LAMP MODE is set to STANDARD. Select this setting to enable or disable LPF. Use this setting to adjust projected images when noise appears in the top part of the image. Use this setting to adjust projected images when noise appears in the bottom part of the image. Use this setting to adjust projected images when noise appears in the left half of the image. Use this setting to adjust projected images when noise appears in the right half of the image. ? Feature description Select this setting to adjust the horizontal position of projected images. Select this setting to adjust the vertical position of projected images. Select this setting to eliminate flickering or blurs, if they appear, when you are viewing projected images. Select this setting to eliminate vertical wide stripes, if they appear, when you are viewing projected images. Automatically sets the appropriate setting. Select this setting when you connect the projector to high definition video equipment having R, G, and B output terminals. Select this setting when you connect the projector to a DVD player or other device having Y, CB, and CR (or Y, PB, and PR) component video output terminals. [. . . ] R(RED)/CR G(GREEN)/Y B(BLUE)/CB GND GND GND GND GND DDC5V GND GND DDC Data HD/CS VD DDC Clock 5 OUT pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Spec. R(RED)/CR G(GREEN)/Y B(BLUE)/CB GND GND GND GND GND HD/CS VD - Dimensional drawings (unit : mm) What's included in the box AC power cord for US J2552-0063-01 for EU J2552-0066-01 for UK J2552-0065-01 J2552-0072-03 1 1 1 2 1 1 Remote control Safety Manual/Quick Start up CD-ROM Battery Lens cap Soft case 1 RGB cable for PC Replacement part (Option / Not included in the box) Spare lamp for PLFY-P-NCMU-E VLT-XD221LP EN-34 Specifications (continued) Specification of RGB signals in each computer mode of the projector Signal mode TV60, 480i (525i) TV50, 576i (625i) 1080i 60 (1125i 60) 1080i 50 (1125i 50) 480p (525p) 576p (625p) 720p 60 (750p 60) 720p 50 (750p 50) CGA84 CGA85 VGA60 VGA72 VGA75 VGA85 SVGA56 SVGA60 SVGA72 SVGA75 SVGA85 XGA60 XGA70 XGA75 XGA85 SXGA70a SXGA75a WXGA60 WXGA60a WXGA60b WXGA60c SXGA60b SXGA60 MAC13 MAC16 MAC19 HP75 SUN66a SUN76a resolution (H x V) 640 x 400 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1152 x 864 1280 x 768 1280 x 800 1360 x 768 1366 x 768 1280 x 960 1280 x 1024 640 x 480 832 x 624 1024 x 768 1024 x 768 1152 x 900 1152 x 900 horizontal frequency (kHz) 15. 73 15. 63 33. 75 28. 13 31. 47 31. 25 45. 00 37. 50 37. 86 37. 86 31. 47 37. 86 37. 50 43. 27 35. 16 37. 88 48. 08 46. 88 53. 67 48. 36 56. 48 60. 02 68. 68 63. 85 67. 50 47. 77 49. 70 47. 71 47. 50 60. 00 63. 98 35. 00 49. 72 60. 24 62. 94 61. 85 71. 81 vertical frequency (Hz) 59. 94 50. 00 60. 00 50. 00 59. 94 50. 00 60. 00 50. 00 84. 13 85. 08 59. 94 72. 81 75. 00 85. 01 56. 25 60. 32 72. 19 75. 00 85. 06 60. 00 70. 07 75. 03 85. 00 70. 01 75. 00 59. 87 59. 81 60. 01 59. 75 60. 00 60. 02 66. 67 74. 55 75. 02 74. 92 66. 00 76. 64 PLFY-P-NCMU-E (H x V) 1024 x 768 1024 x 768 1024 x 576 1024 x 576 1024 x 768 1024 x 768 1024 x 576 1024 x 576 1024 x 640 1024 x 640 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 614 1024 x 640 1024 x 578 1024 x 575 1024 x 768 960 x 768 1024 x 768 1024 x 768 1016 x 768 1024 x 768 984 x 768 984 x 768 *1 *1 *1 *1 *2 *2 *2 *2 *2 *2 *2 *2 *2 *1 When you input the signals WXGA60, WXGA60a, WXGA60b, or WXGA60c, select the supported image size from WXGA of the FEATURE menu. *2 The partial enlargement feature is not supported. Important: · · · · · Some computers aren't compatible with the projector. [. . . ]