User manual MITSUBISHI WD-62827

[. . . ] WD-62827 WD-62927 WD-73827 WD-73927 Projection Television Owner's Guide TV Information Use this space to record the model number and serial number of your television. This information is on the back of your TV. Model Number Serial Number Purchase Date TM visit our website at www. mitsubishi-tv. com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] For example, the TV can set up a connection for an IEEE 1394 cable box that sends a program to another device for viewing. NetCommand establishes the connection between the two devices. Set up a recording over a peer-to-peer connection the same as you would any other NetCommand-controlled recording. NOTE: Analog or traditional (non-digital) devices can not be used for peer-to-peer connections. 2. Press RECORD or CONNECT on the TV remote control to open the Recording Setup screen. In the "Record To" section of the Recording Setup screen, review the destination device and duration of the connection. Press RECORD or CONNECT a second time to establish the connection. NOTE: Multiple peer-to-peer connections can operate simultaneously, sometimes with the same source device. Please note that peer-to-peer connections are NOT listed on the Record List screen. Cancelling a Peer-to-Peer Connection To cancel a peer-to-peer connection: 1. Press DEVICE to open the Device Selection menu. Highlight the source device in the Device Selection menu. Confirm that the on-screen icon for the peer-to-peer connection is in the Connection Section next to the TV icon 4. The peer-to-peer connection ends and the destination icon is removed. If there is more than one peer-to-peer connection for the same device, all the connections are cancelled. Figure 9. Recording Setup screen for peer-to-peer connection Setting up a Non-Recording Peer-to-Peer Connection To establish a peer-to-peer connection: 1. Select the source in the Device Selection menu. 62 Chapter 4. Netcommand Functions Chapter 5 TV Menu Operations Main Menu . . 64 65 67 70 72 74 76 79 80 81 Main Menu Setup Menu Figure 1 Channel Menu Figure 4 Use the Setup menu to select English or Spanish as the language for the menus and on-screen displays. Memorize the available channels for antennas or cable connected to the ANT-1 and ANT-2 inputs. Manually set the time for the TV, or select Auto and the TV will automatically set the time based upon Extended Data Service (XDS) time data. This time data is usually broadcast by your local PBS station. This menu is also used to set the TV timer and reset the lamp reminder. [. . . ] ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF ONE YEAR. UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, special, or consequential damages, so the above limitations or exclusions may not apply to you. [. . . ]