User manual MITSUBISHI WS-48511

[. . . ] AD JU ST Projection Television Models WS-B55 WS-48511 WS-55511 WS-55711 WS-65511 WS-65611 WS-65711 WS-65712 WS-73711 Owner's Guide visit our website at w w w. c o m CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Warning: To avoid permanently imprinting a fixed image onto your TV screen, please do not display the same stationary images on the screen for more than 15% of your total TV viewing in one week. [. . . ] Some channels may send incorrect time information; this is not a defect in the TV. Figure 1. Clock Menu (Auto) Time Zone (Figure 1) (Figure 2) Set Time When Auto has been selected for the Clock Setting, you need to select the correct time zone. Use ADJUST or to select the time zone (Atlantic, Eastern, Central, Mountain, Pacific, Alaska, or Hawaii) for your area. Then use ADJUST to move to the Daylight Savings Time option. When manual has been selected for the clock setting, you need to set the time. Press and hold or to quickly adjust the time. Then use to move to the "Set Day" option. (Figure 1) Daylight Savings Time When Auto has been selected for the Clock Setting, you need to select the Daylight Savings Time (DST) option that your state uses. Use Adjust or to select Applies if your state or area uses DST, or Ignore if your state or area does not use DST. The clock time and day will be set automatically after tuning to a channel carrying the Extended Data Service (XDS) time data (usually your local PBS channel). Figure 2. Clock Menu (Manual) (Figure 2) Clock Setting (Manual) For the manual clock setting, select the current time, including AM or PM and the day. (Figure 2) Set Day When Manual has been selected for the Clock Setting, you need to select the current day of the week. Use or to select the correct day. 48 Captions Menu: Analog and Digital Captions Background To make the analog closed captions easier to read, you can choose to display the background color as either black or gray behind the captions. If you use Closed Captions frequently, Mitsubishi recommends gray for the background to prevent uneven aging of the picture tubes. Note: See page 70 for information concerning uneven aging of picture tubes. Figure 1. Captions menu Figure 1 Captions Menu On analog channels (Ant-A or Ant-B), broadcasters can send either Standard or Text closed captioning. Standard Closed Captions follow the dialogue of the characters on-screen and display in a small section of the screen. Text Closed Captions often contain information such as weather or news and covers a large portion of the screen. On digital channels (Ant-DTV) broadcasters can send up to 6 different captioning selections. Each TV station may broadcast only one or two types of captions or none at all. The TV can display one of the following Captions for Digital sources: · Captions 1-6 · On if Mute Closed captions when mute. When selected, the captioning signal (Caption 1) will turn on/off by pressing the MUTE button on the TV remote control. · Off - No closed captions. Digital Captions Digital Settings Closed Captions provider selects Default options when sending digital closed captions. You may, however, select Custom option to customize the appearance. The TV can display one of the following captions for Analog sources: · CC1, CC2, CC3, or CC4 (Standard closed captioning signals). · Text1, Text2, Text3, or Text4 (Text closed captioning signals). When selected, the standard closed captioning signal (CC1) will turn on/off by pressing the MUTE button on the TV remote control. [. . . ] Some A/V Receivers will switch automatically to digital when a digital audio signal is supplied so you do not need to do anything. Other A/V Receivers can be manually switched by remote control, for these types of A/V Receivers, see the NetCommandTM Guide Appendix for NetCommandTM control of this features. Some A/V Receivers will require that you make this change on the front panel of the A/V Receiver. Q. The front panel of my A/V Receiver is too tall or too convex for the IR emitter signal to reach the remote control sensor of the A/V Receiver. [. . . ]