User manual MITSUBISHI XD3500U

[. . . ] DLPTM PROJECTOR MODEL XD3500U User Manual XD3500 This User Manual is important to you. Please read it before using your projector. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. WARNING Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception. [. . . ] (See page 33. ) Select from the predetermined color temperatures. Use to adjust the color temperature to a desired value. (See page 34. ) Use to adjust the color thickness of the projected image. (See page 33. ) Use to adjust the color tint of the projected image. (See page 33. ) Use to adjust the sharpness of the projected image. (See page 33. ) The ADVANCED MENU is displayed for the following settings. Use to reduce noise and roughness in the image when noisy video signal is input. Use to correct smeared color boundaries. For analog signal input: The input level of video signal differs among devices to be connected. High input level causes solid white in displayed image and low input level causes displayed image to get dark. Use this menu to adjust the input level of analog video signal. For digital signal input: When a digital signal is input, ENHANCED and NORMAL are switchable. (See page 21. ) Does not display captions. Displays captions. ENHANCED / NORMAL CLOSED CAPTION · · · · · · · OFF CC1 / CC2 When COLOR ENHANCER is sRGB, COLOR TEMP. , COLOR and TINT can't be adjusted. When the setting of COLOR ENHANCER is changed, the displayed image may be disturbed. When the COMPUTER1, COMPUTER2, DVI or HDMI is selected as the input source, COLOR and TINT can't be adjusted. TINT is available only when the NTSC signal is input. INPUT LEVEL is unavailable when the digital signal is supplied from the YCBCR/YPBPR terminal of the connected device. Captions are not displayed while information about the menu, volume setting, or input signal selection is being displayed on the screen. The closed caption function displays text information included in the NTSC signal, which is mainly used for TV broadcasting in North America. EN-29 Menu operation (continued) INSTALLATION menu opt. opt. INSTALLATION LAMP MODE STANDBY MODE AUTO POWER ON AUTO POWER OFF IMAGE CAPTURE ON INSTALLATION STANDARD STANDARD OFF OFF GO ON BLUE BLACK OFF OK LENS LOCK ZOOM/FOCUS LOCK LENS SHIFT LOCK LENS SHIFT RESET OFF OFF OK SPLASH SCREEN BACK COLOR AV MUTE MODE IMAGE REVERSE LENS LOCK ITEM LAMP MODE STANDBY MODE SETTING STANDARD LOW STANDARD LOW AUTO POWER ON ON / OFF AUTO POWER OFF IMAGE CAPTURE SPLASH SCREEN BACK COLOR AV MUTE MODE IMAGE REVERSE OFF / 5-60min GO ON / OFF BLUE / BLACK / IMAGE BLACK / IMAGE OFF MIRROR INVERT MIRROR INVERT LENS LOCK ZOOM/FOCUS LOCK LENS SHIFT LOCK LENS SHIFT RESET · · · · · · OK ON / OFF ON / OFF OK FUNCTION Select this option when you want to view images in a well-lit room. Select to moderate the intensity of the lamp. [. . . ] Please contact Kensington Technology Group below. Kensington Technology Group 2855 Campus Drive San Mateo, CA 94403, U. S. A. Phone: +1- (650)572-2700 Fax: +1- (650)572-9675 EN-49 Specifications The specifications and outside appearance of the projector are subject to change without prior notice. Type Model Display technology Projection lens Light-source lamp Image size (projection distance) Maximum resolution Computer signal Video signal Component signal Computer/component video input DLPTM projector XD3500U 0. 7-inch Single chip DMD Pixel 1024 x 768 = 786432 pixels F 2. 0 - 2. 4 f= 24. 5 - 33. 1 mm 330 W 40" min. [. . . ]