User manual MITSUBISHI XD530

[. . . ] EN DATA PROJECTOR MODEL XD530U/XD530E User Manual This User Manual is important to you. Please read it before using your projector. ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. WARNING Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception. [. . . ] *9 Available only when the signal is inputted with the wireless connection. EN-31 ENGLISH Menu operation (continued) Basic operation Several settings can be adjusted using the menu. Example : Auto power off time setting 1. Press the MENU button. opt. 4. Press the or button to select AUTO POWER OFF. OFF OFF AUTO POWER ON AUTO POWER OFF 5. Press the or button to adjust the auto power off time. OFF 30min IMAGE 2. Press the or opt. button to select INSTALLATION. · AUTO POWER ON AUTO POWER OFF Exit the menu by pressing the MENU button several times. When the button doesn't function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again. After selecting the items marked with , press the ENTER button. Important: INSTALLATION 3. Press the ENTER button (or opt. INSTALLATION WALL SCREEN BEIGE Menu Options Set the following options provided in the respective menus. 1. IMAGE menu Menu option AUTO COLOR ENHANCER PRESENTATION STANDARD THEATER USER ±30 ±30 4 options Setting Feature description Automatically sets an optimal color balance based on the input signal. Makes projected images bright and crisp. Adjusts the gamma curve, color intensity, or balance. (See page 36. ) Adjusts the contrast of projected images. (See page 36. ) Adjusts the brightness of projected images. (See page 36. ) Adjusts the color temperature. You cannot select this setting when WALL SCREEN in the INSTALLATION menu is set to a setting other than OFF. (See page 36. ) Adjusts the color tone of projected images. (See page 36. ) You cannot select this setting when the COMPUTER1, COMPUTER2, DVI or WIRELESS is selected as the input source. Adjusts the color tint of projected images. (See page 36. ) You can select this setting only when NSTC is selected as the input signal. Adjusts the sharpness of projected images. (See page 36. ) Reduces noise of projected images when the input signal is noisy. [. . . ] Images with SYNC on G (Green) signal may jitter. Images with SYNC on G (Green) signal may be tinged with green. If the resolution and frequency of your computer aren't shown on the table, find the compatible resolution and frequency by changing the resolution of your computer. · · · · · Set COMPUTER INPUT in the SIGNAL menu to RGB when inputting the HDTV signal as RGB signal. TV60 and TV50 are equivalent to 480i and 576i respectively. [. . . ]