User manual MITSUBISHI XD60

[. . . ] DATA PROJECTOR MODEL XD60U User Manual IMPORTANT * DLPTM (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instruments Incorporated (U. S. A. ). * VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U. S. A. ). * S-VGA is a registered trademark of Video Electronics Standards Association. * Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U. S. A. [. . . ] A press of the FREEZE button changes the screen to a still picture. A further press returns the screen to a moving picture. FREEZE STANDBY MENU RGB ENTER VIDEO CANCEL QUICK Q MUTE LAMP MODE AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER Cancelling Video and Audio Temporarily This function is used to cancel the video and audio at the same time. STANDBY MENU A press of the MUTE button will blank the picture and the sound, and the screen will take on the background color that has been set. Another press will cause a return to the original conditions. RGB ENTER VIDEO CANCEL QUICK Q FREEZE MUTE LAMP MODE AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER Lamp Mode Use this if the picture is projected on a small screen and the picture is too bright or when projecting images in dark rooms. Pressing the LAMP MODE button will set the lamp mode. Low (STATUS indicator is lit green) Lamp brightness is set to 80% and the lamp life is extended. STATUS indicator Normal (STATUS indicator is off) Lamp brightness is set to 100% and the screen is bright. STATUS STANDBY Note: Frequent switching this mode can degrade the lamp. STANDBY MENU RGB ENTER VIDEO CANCEL QUICK Q FREEZE MUTE LAMP MODE AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER E-28 General Operation Keystone Use this to adjust for trapezoidal (keystone) distortion of the projected image. Adjustment Method (1) Press the or KSTN button to make the left and right sides parallel. The keystone adjustment display appears when one of the buttons is pressed. STANDBY MENU RGB ENTER VIDEO CANCEL QUICK Q (2) FREEZE MUTE LAMP MODE AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER (1) Press the " " button. Press the " " button. The dotted lines indicate the proper condition (2) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. Note: * Keystone adjustment values can be saved. See "Keystone Save" on Page E-48. * Screen examples have been drawn in an exaggerated style for the purpose of description. * Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely. Adjustment of the Volume This function adjusts the volume of the built-in speaker. (1) Press the or VOL button to adjust the volume. The volume adjustment display appears when one of the buttons is pressed. STANDBY MENU RGB ENTER VIDEO CANCEL QUICK Q (2) FREEZE MUTE LAMP MODE AUTO 1 2 3 4 ASPECT The button increases the volume and the volume. button decreases the VOL KSTN ZOOM TIMER (2) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. Note: * Adjustment of the volume will not produce any sound unless an image is being projected. (1) E-29 General Operation Enlargement of the Image and Video Movement This function digitally enlarges the personal computer image and video image. (1) Press the ZOOM button to enlarge the image. The zoom display appears when the ZOOM button is pressed. STANDBY MENU RGB ENTER VIDEO CANCEL QUICK (2) (3) Q FREEZE MUTE LAMP MODE AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER (1) When the button is pressed, the image is enlarged approximately 2 times, and when the button is pressed the image is reduced (returning to 1:1). · The enlargement function cannot be used with digital RGB inputs. Zoom 0 Zoom 21 (No enlargement) (Approximately 2 times enlargement) (2) Pressing the SELECT buttons on the remote control at the time of the zoom operation will cause the display position to move. (There will not be any movement when zoom is at 0. ) Zoom 21 Zoom 21 (Approximately 2 times enlargement) (Movement) (3) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. Note: After magnifying the image, be sure to use the ZOOM button to bring the gauge value back to "0". The image can also be moved in the following circumstances. · · When "Aspect" is set to "Real" by the signal of the Analog RGB, and the input resolution is higher than the display resolution of the projector. When "Aspect" is set to "Zoom" by the video signal. Note: * Zoom and image movement functions are cancelled when the input is switched. * Movement of the screen will not be possible when the menu screen is being displayed. [. . . ] · If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer or the store the projector was purchased. E-58 Replacing the Lamp Cartridge Preparations: Turning the projector upside-down on top of a soft cloth, etc. , so that it does not get scratched makes it easier to replace the lamp cartridge. [. . . ]