User manual MITSUBISHI XL2

[. . . ] LCD Projector User Manual XL2 MODEL XL2U EN ­ 1 ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. WARNING Use the attached specified power supply cord. If you use another power-supply cord, it may cause interference with radio and television reception. [. . . ] Use this setting when the projector is hanging from the ceiling. · The projector will be in the stand-by mode when the lamp is off. Use the remote control to turn on the lamp. Set the time elapsed before the projector enters into the stand-by mode when there is no signal inputted from the selected source. Select ON to display the splash screen when the power is turned ON. · The splash screen can be changed. For more details, please consult your dealer. Use to select the background, BLUE, LOGO or BLACK, which will be displayed when there is no signal inputted from the selected source. When the LOGO is selected, the splash screen will be displayed. Use to select the background, BLACK or LOGO, which will be displayed when the MUTE button is pressed. When the LOGO is selected, the splash screen will be displayed. Use to change the brightness of the lamp. When LOW is selected, the image will become darker, though the power will be saved, operating sound will be reduced. · The intensity of the lamp will be STANDARD for 3 minutes regardless of the setting of the LAMP MODE when the lamp turns on. · When the LAMP MODE is changed, the screen may flicker. Use to reverse or invert the projected image. Select MIRROR, INVERT in rear projection with the projector hanging from the ceiling. ON · When no signal is supplied for 6 hours with BACK COLOR set to BLACK, it changes to BLUE automatically for the purpose of protecting the projector. · When you continue projection for a long time with BACK COLOR or MUTE set to LOGO, an after-image may persist on the screen. · When the signal is lost during muting with MUTE set to LOGO, AUTO POWER OFF is ignored even though it is active. EN ­ 16 3 FEATURE opt. Use to select the position of the menu on the screen, XGA60 (upper left) or (lower right). Select COMPUTER to output the sound which is inputted to FRAME POSI. the audio input terminal when COMPUTER is selected as the COMPUTER AUDIO MODE VIDEO source. [. . . ] Exchange with a new lamp if the same problem recurs. Steady green Blinking green/red Off Lamp duration warning. (Lightning duration total about 1, 500 hours*. When the POWER is ON. ) Lamp duration warning. (Lightning duration total about 1, 500 hours*. When the POWER is OFF. ) Lamp duration warning. (Lightning duration total about 2, 000 hours*. ) The lamp cover is not closed. Steady red Blinking red Off Steady red Steady red Off Close the cover correctly. Blinking green/red Off Off Abnormal. Steady or Blinking green/red Blinking Blinking Steady or Contact your dealer. *) When LAMP MODE of the INSTALLATION menu is set to STANDARD. [. . . ]