User manual MOFFAT MGH700X

[. . . ] INSTRUCTION BOOKLET GB GAS HOB MGH 700 Please read this instruction booklet before using the appliance Important Safety Information You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 950950 Installation This appliance must be installed and serviced by a competent person as stated in the Gas Safety (Installation and Use) Regulations Current Editions and the IEE Wiring Regulations. Remove all packaging before using the hob. Ensure that the gas and electrical supply complies with the type stated on the rating plate, located near the gas supply pipe. [. . . ] Visits may be available outside these hours, in which case a premium will be charged. * * Appliances found to be in use within a commercial or similar environment, plus those which are the subject to rental agreements. Products of Moffat manufacture which are not marketed by Moffat. European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: * The guarantee starts from the date you first purchased your product. * The guarantee is for the same period and to the same extent for labour and parts as exist in the new country of use for this brand or range of products. * This guarantee relates to you and cannot be transferred to another user. * Your new home is within the European Community (EC) or European Free Trade Area. * The product is installed and used in accordance with our instructions and is only used domestically, i. e. a normal household * The product is installed taking into account regulations in your new country. Before you move, please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0)3 44 62 29 99 Germany Nürnberg +49 (0)911 323 2600 Italy Pordenone +39 (0)1678 47053 Sweden Stockholm +46 (0)8 738 79 50 UK Slough +44 (0)1753 219897 Exclusions This guarantee does not cover: * Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. * Costs incurred for calls to put right an appliance which is improperly installed or calls to appliance outside the United Kingdom. 6 Instructions for the Installer Engineers technical data OVERALL DIMENSIONS Width: Depth: 680 mm. Rear Left Burner (rapid) Heat Input 2. 8 kW Natural Gas (10239 BTU/HR) 2. 8 kW L. P. G. (9556 BTU/HR) Front Left Burner (auxiliary) Heat Input 1. 0 kW (3413 BTU/HR) Rear Right Burner (semi rapid) Heat Input 2. 0 kW (6824 BTU/HR) Front Right Burner (semi rapid) Heat Input 2. 0 kW (6824 BTU/HR) Central Burner (ultra-rapid triple-crown) Heat Input 4. 0 kW (13652 BTU/HR) CUT OUT DIMENSIONS Width: Depth: 560 mm. Before making the cut out in the worktop ensure that the edges of the hob that are to be near either a side or rear wall have a minimum distance of 55 mm. between the edge of the hob and the wall. The minimum distance combustible material can be fitted above the hob is 400 mm. must be allowed from the edges of the hob. The minimum distance combustible material can be fitted directly above the hob is 700 mm. must be left between the side edges of the hob and any adjacent cabinets or walls. 700 mm 400 mm 55 mm 400 mm 100 mm 50 m m 50 m m FO 2231* 8 Installation IMPORTANT: This hob must be installed by a competent person to the relevant Gas Standards. Any gas installation must be carried out by a competent person. The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored. [. . . ] Resistance should be less than 0. 1 (Ohm), check all earth wires for continuity and all contacts are clean and tight. INSULATION CHECK - Appliance electrically disconnected, all switches ON. Test leads from L to N in appliance terminal block. If meter reads «0» then there is a short circuit. [. . . ]