User manual MOREBOX 301D

[. . . ] 301D User's Manuals << Free To Air >> Digital Satellite Receiver SAFETY PRECAUTION CAUTION: The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage" and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don't open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance(servicing). WARNING: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on the apparatus. WARNING: Do not put the candle or lamp stand on the cabinet; otherwise, there is the danger of fire. WARNING: The unit should be connected to a power supply only of the type descry bed in the operating instructions or as marked on the unit. [. . . ] DiSEqC1. 0 4Port: Use [Vol/] to switch the options of DiSEqC1. 0. Between Disable / LNB1 / LNB2 / LNB3 / LNB4. TP Index: Use [Vol/] to select the desired transponder or press [OK] to open the TP list to select directly with [CH/], press [OK] again to display the TP number where the channel can be found. FTA Only: Press [Vol/] to select to scan only free channels or even scrambled channels. If you select "Yes" it will scan free channels only. Scan Channel: Press [Vol/] to select to scan TV + radio channels, or just TV channels or just radio channels. Scan Mode: You can select "Auto Scan", "Preset Scan" or "NIT Search" to blind scan preset transponders or network transponders of the selected satellite. In the lower part of the window the progress of scanning and the found channels are displayed. 3. 7. 8. 22 Menu Operations 4. 2 Multi Search When you enter the "Multi Search" menu a window like the one beside will open. In the "Satellite" item press [Vol/] to select the satellite which you want to scan or press [OK] to open the "satellite list" to select directly with [CH/], and press [OK] to mark/unmark and [MENU] to finish the selection. You can select several satellites in this menu. The system will use DiSEqC1. 0/1. 1, DiSEqC1. 2 and USALS functions to search the marked satellites and scan channels. On "FTA Only" item, press [Vol/] to select scanning of all channels or just scanning of free channels. If you select "Yes", it will scan free channels only. On "Scan Channel" item, press [Vol/] to select the scanning range from TV + radio channels, only TV channels or only radio channels. On "Scan Mode" item, you can select "Auto Scan", "Preset Scan" or "NIT Search" to blind scan preset transponders or network transponders of the selected satellite. Select "Search" and press [OK] to start scanning. In the lower part of the window the progress of scanning and the found channels are displayed. Press [Menu/Exit] to cancel or finish the scanning and saving the found channels. 4. 3 TP Scan When you enter "TP Scan" menu a window like the one beside will be displayed. In the "Satellite" item press [Vol/] to select the satellite which you want to scan or press [OK] to open the "satellite list" to select directly with [CH/], press [OK] to confirm it. 23 Menu Operations 2. TP Index: Use [Vol/] to select the desired transponder or press [OK] to open the TP list to select directly with [CH/], press [OK] again to display the TP number where the channel can be found. [. . . ] This function allows you to upgrade the software of the receiver. This can be done from PC to receiver or from a master receiver to a slave receiver. Connect master receiver or PC to the slave receiver via serial interface (0-Modem cable). Enter the "Software Upgrade" menu of the master receiver and press [Vol/] to change the upgrade mode. [. . . ]