Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MORLEY PEDALS BSOVES. We hope that this MORLEY PEDALS BSOVES user guide will be useful to you.
Lastmanuals help download the user guide MORLEY PEDALS BSOVES.
Detailed instructions for use are in the User's Guide.
[. . . ] We know you will appreciate the rugged construction of your Morley®. Most of all, we hope you enjoy using it as much as we enjoyed building it.
THANK YOU!
9V: Use Morley's 9 VDC 300 milliamp regulated adapter only. Plug instrument into this jack using 1/4" guitar cable. [. . . ] Plug instrument into this jack using 1/4" guitar cable. OUT: Connect amplifier to this jack using a 1/4" guitar cable. NOTE: You'll find cords fit very tightly into our input and output jacks. The tight fit helps prevent the cord from becoming accidentally unplugged from the pedal. Make sure the cords are completely plugged in for best results.
WARRANTY
All Morley® pedals are warranted for two years from date of purchase. To obtain warranty service contact the store where purchased, or call 1-800-639-4668.
NOTES:
1. Using the PDW-NV distortion mode at maximum setting when your amp is in distortion or high gain may cause uncontrolled feedback or a high pitched squeal. . Remove the battery door located on the bottom of the pedal (a short cord is attached to the door to help prevent loss). Once the door is off, the old battery can be removed from the battery snap and a new battery plugged in. Make sure the polarity (+/-) is correct before inserting the new battery. When you replace the battery door , you will notice it fits very tightly against the battery. This prevents the battery from rattling inside the pedal.
·
NOTE: This pedal is not intended for use through an effects loop (send and return).
FEATURES ·
LED indication: Located above the "WAH" and "Distortion" switches. Indicate when pedal is in wah or distortion mode. If pedal is powered by battery, plugging a cord into the input jack will turn on LED (when in wah or distortion mode). [. . . ] Indicate when pedal is in wah or distortion mode. If pedal is powered by battery, plugging a cord into the input jack will turn on LED (when in wah or distortion mode). If an adapter is used, the LED will function (when in wah or distortion mode) until the adapter is disconnected.
Try the following settings to get started. . . . . . . . . . .
·
WAH On/Off Switch: This switch turns the WAH effect "on" or "off".
·
DISTORTION On/Off Switch: Turns the distortion effect "on" or "off".
·
Electro-Optical: The amount of light from the LED (Light Emitting Diode) that shines on the LDR (Light Dependent Resistor) is controlled by a shutter placed between the two devices. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MORLEY PEDALS BSOVES
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MORLEY PEDALS BSOVES will begin.
