User manual MORLEY PEDALS DFBES

[. . . ] Telephone No. : 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For Customers in the U. S. A. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] ssss stands for any number within the range from 0001 to 9999. The numerical portions of the name of a movie file recorded in movie mode and its corresponding index image file are the same. ­ Still image files: DSC0ssss. JPG ­ Movie files: MOV0ssss. MPG ­ Index image files that are recorded when you record movies: MOV0ssss. THM Image file storage destinations and file names The image files recorded with your camera are grouped as folders on the "Memory Stick". 60 Viewing image files stored on a computer with your camera This section describes the process using a Windows computer as an example. When an image file copied to a computer no longer remains on a "Memory Stick", you can view that image again on the camera by copying the image file on the computer to a "Memory Stick". · Step 1 is not necessary if the file name set with your camera has not been changed. · You may be unable to play back some images depending on the image size. · When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed. · When there is no folder, first create a folder with your camera (page 48) and then copy the image file. 2 Copy the image file to the "Memory Stick" folder in the following order. 1Right-click the image file, then click [Copy]. 2Double-click [Removable Disk] or [Sony MemoryStick] in [My Computer]. 3Right-click the [sssMSDCF] folder in the [DCIM] folder, then click [Paste]. · sss stands for any number within the range from 100 to 999. Using your computer 1 Right-click the image file, then click [Rename]. Change the file name to "DSC0ssss. " Enter a number from 0001 to 9999 for ssss. 1 2 · If the overwrite confirmation message appears, enter a different number in step 1. · An extension may be displayed depending on the computer settings. · When your computer resumes from the suspend or sleep mode, communication between your 3 Copy image files to the Macintosh computer. 1Double-click the newly recognized icon t [DCIM] t the folder where the images you want to copy are stored. 2Drag and drop the image files to the hard disk icon. The image files are copied to the hard disk. · For details on the storage location of the images and file names, see page 60. 4 View images on the computer. Double-click the hard disk icon t the desired image file in the folder containing the copied files to open that image file. 64 To disconnect the cable for multi-use terminal/ remove the "Memory Stick"/ turn off the camera Drag and drop the drive icon or the icon of the "Memory Stick" to the "Trash" icon, then remove the cable for multi-use terminal, remove the "Memory Stick", or turn off the camera. · If you are using Mac OS X v10. 0, perform the procedure above after you have turned your computer off. 6 After the user information screen appears, enter the desired name and password. The installation of the software starts. To start up "ImageMixer VCD2" Open [Image Mixer] in [Application], then double-click [ImageMixer VCD2]. For information on the use of the software Click [?] at the upper-right corner of each screen to show the on-line help. Technical support for "ImageMixer VCD2" is provided by the Pixela User Support Center. For more information, refer to the information included on the CD-ROM. Using your computer Creating a video CD using "ImageMixer VCD2" · You can create an image file that is compatible with the video CD creation function. To save the data in the video CD format on a CD-R, you need Toast (not supplied) by Roxio. To install "ImageMixer VCD2" · Shut down all other application software before you install "ImageMixer VCD2. " · The display settings should be 1024 × 768 dots or higher and 32, 000 colors or higher. 1 Turn on your Macintosh computer, and insert the CD-ROM (supplied) into the CD-ROM drive. 3 Copy the [IMXINST. SIT] file in the [MAC] folder to the hard disk icon. 4 Double-click the [IMXINST. SIT] file in the copy-to folder. 5 Double-click the extracted [ImageMixer VCD2_Install] file. 65 Printing still images How to print still images Printing directly using a PictBridge compliant printer (page 67) You can print images by connecting the camera directly to a PictBridge compliant printer. Printing directly using a "Memory Stick" compliant printer You can print images with a "Memory Stick" compliant printer. For details, see the operating instructions supplied with the printer. Printing using a computer You can copy images to a computer using the supplied "PicturePackage" software and print the images. Printing at a shop (page 70) You can take a "Memory Stick" containing images shot with your camera to a photo printing service shop. [. . . ] 70 Printing at a shop. . . . . . . . . . . . . . . . . . 70 Printing directly. . . . . . . . . . . . . . . . . . . . 67 Program auto shooting . . . . . . . . . 23 Protect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 PTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 I Identifying parts . . . . . . . . . . . . . . . . . . . 14 Image file storage destinations and file names . . . . . . . . . . . . . . . 60 Image quality . . . . . . . . . . . . . . . . . . 13, 32 Image size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 t step 4 in "Read This First" ImageMixer . . . . . . . . . . . . . . . . . . . . . . . . . . 62 ImageMixer VCD2. . . . . . . . . . . . . . . 65 Incandescent . . . . . . . . . . . . . . . . . . . . . . . . . 31 Index mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Index screen t step 6 in "Read This First" "InfoLITHIUM" battery pack . . 90 Insert/Remove t step 3 in "Read This First" Install . . . . . . . . . . . . . . . . . . . . . . . . 55, 62, 65 Internal rechargeable battery 92 Interval. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 ISO. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12, 32 L Landscape mode t step 5 in "Read This First" N NR slow shutter. . . . . . . . . . . . . . . . . . . . [. . . ]