User manual MORLEY PEDALS SLMC4

[. . . ] WARRANTY This Morley® pedals is warranted for 90 days from date of purchase. To obtain warranty service, contact the store where purchased, or call 1-800-284-5172. SPECIFICATIONS POWER: Two 9 Volt Batteries or 12VDC 300 milliamp adapter (center pin is positive) CONTROLS: Minimum Volume, Travel INDICATOR: LED power on · NOTE: This pedal is not intended for use through an effects loop (send and return). 185 Detroit Street, Cary, IL 60013 Phone: (847) 639-4646 Fax: (847) 639-4723 www. morleypedals. com Slimline 4 Way Multi-Channel Volume Pedal Model SLMC-4 For purchasing a Morley® pedal. [. . . ] NOTE: Because of the many varieties of instruments and amps, the minimum volume control may have no effect until it is turned clockwise (right) half or more of its travel. This is normal - time spent finding the right setting will make your pedal's volume response perfect for your style. Example #1 - For volume change throughout travel of the pedal: With the pedal in the "off" position (toe up) while continuously playing a note on your instrument, turn the minimum volume control clockwise (right) until you start to hear the note through your amp. Then, turn the control counter clockwise (left) slightly until the note can't be heard through the amp. Example #2 - For rhythm to lead changes: With the pedal in the "off" position (toe up), turn the minimum volume control clockwise (right) until you're playing at your normal rhythm level through your amp. With this setting, you can play rhythm with the pedal "off"(toe up) and move the pedal forward (toe down) for solos. When you return to rhythm, simply move the pedal back to "off" position. This eliminates hunting for your original rhythm volume level once you've completed your solo. CONNECTIONS 9V: Use Morley's 12 VDC 300 milliamp adapter only. Plug instrument into these jacks using 1/4" guitar cables. OUTPUTS (Channel 1 - 4): Connect amplifier(s) to these jacks using 1/4" guitar cables. AC ADAPTER Use Morley's 12VDC 300 milliamp adapter only. To prolong adapter life, always plug the adapter into the pedal BEFORE plugging adapter into power source. BATTERY The SLMC-4 is designed to use two 9 volt batteries when not using an adapter. We suggest you use good quality alkaline batteries. To prolong battery life, unplug your cord(s) completely from both input jacks when not using the pedal. [. . . ] When you close the battery door, you will notice it fits very tightly against the batteries. This prevents the batteries from rattling inside the pedal. · [. . . ]