Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MORLEY PEDALS SPRINGCOILED. We hope that this MORLEY PEDALS SPRINGCOILED user guide will be useful to you.
Lastmanuals help download the user guide MORLEY PEDALS SPRINGCOILED.
Manual abstract: user guide MORLEY PEDALS SPRINGCOILED
Detailed instructions for use are in the User's Guide.
[. . . ] And Step On It.
SPRING REPLACEMENT INSTRUCTIONS FOR VAI-1, NSW OR PBA
(coiled spring style) Follow the below instructions to replace a broken or fatigued spring on any of the above mentioned pedal models.
Tools you will need: - 12 mm nut driver - 5/16" nut driver - 1/4" nut driver - Phillips Screwdriver (medium tip) - Long tip Needlenose pliers (2" long tip) - 3/8" Wrench (Open end or Box end) DISASSEMBLY 1) Remove four bottom cover screws using Phillips screwdriver. [. . . ] Tighten thoroughly and repeat for other side. 2) Using diagrams 1 & 2 as guides, squeeze the spring to line up screw openings.
3) Place one 6-32 x 1/2" Phillips pan head screw into spring opening. The screw head should be on the inside of the spring with the threads sticking up outside the spring (see Diagram #2)
4) Place spring into position (see Diagram #3).
5) Place base into treadle allowing screw to locate in position (shown in Diagram #3). 6) Using the needlenose pliers, hold a 6-32 x 1/2" Phillips pan head screw by the head and insert from underside of treadle bracket. (The thread should stick up in the inside of the pedal base) Replace washer and 5/16" nut. Repeat for two remaining mounting locations and do not tighten completely. This can be accomplished by setting the pedal assembly on its heel end (to push treadle as far toward the toe end as possible) and visually centering the treadle (so it is not cocked right or left). This is important so the shutter is located properly between the optics. [. . . ] 13) Replace bottom cover and bottom cover screws. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MORLEY PEDALS SPRINGCOILED
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MORLEY PEDALS SPRINGCOILED will begin.
