User manual MORPHY RICHARDS 10-12 CUP FILTER COFFEE MAKER

[. . . ] 10/12 cup filter coffee maker Please read and keep these instructions Getting the best from your new coffee maker. Do not place the coffee maker on or near hot surfaces such as a hot plate, radiant rings or near a naked flame. WARNING: Do not place the coffee maker onto a metal tray or metal surface whilst in use. The use of attachments or tools not recommended or sold by Morphy Richards may cause fire, electric shock or injury. [. . . ] refer to `Coffee Quality indicator' page 11 for further information. The automatic keep warm function will keep the coffee warm in the carafe until the product is switched off. For safety reasons the coffee maker will automatically switch off after two hours. The anti-drip valve È will prevent any remaining coffee dripping onto the hot plate during serving. ensure that the jug is replaced on the hot plate after serving. We suggest consuming your coffee within two hours, after this time we suggest brewing another jug of fresh coffee. WARNING: The coffee maker and hot plates are hot and remain hot for some time after switching off. NOTE: Remember to turn off the machine when you have finished. WARNING: The coffee maker and hot plates are hot and remain hot for some time after switching off. NOTE: Remember to turn off the machine when you have finished. Remove the permanent filter and empty the used coffee grounds. Wash the filter immediately and thoroughly. With the automatic function activated the coffee maker will turn on at the desired time and start to brew the coffee. For safety reasons the coffee maker will automatically switch off after two hours. The anti drip valve will prevent any remaining coffee dripping onto the base recess during serving. We suggest consuming your coffee within two hours, after this time we suggest brewing another jug of fresh coffee. It is advised to start heating your milk ready for frothing when you start making the coffee. This helps to ensure the milk reaches its optimum frothing temperature. O 2 Place the jug on the hot plate Î N and push the frother hot plate  ON/OFF switch to the `ON' O position, the hot plate indicator will light up. 3 Once the coffee is brewed (and the auto keep warm indicator lights up) the milk is ready to froth. 4 Engage the frother system by turning the frother control lever P to the right, the motor will start automatically and the milk frother device on indicator will illuminate Ò. 1 This machine has a special selector that maintains the quality of coffee brewed in relation to the number of cups selected. [. . . ] Follow the instructions on the bottle or sachet, and then operate the coffee maker with just water 3 times before making coffee. Do not use kettle descaler unless the packet specifically states it is suitable for coffee makers. If you have any difficulty with your appliance, do not hesitate to call. We are more likely to be able to help than the store from where you bought it. [. . . ]