User manual MORPHY RICHARDS 43733 SS JUG KETTLE

[. . . ] Wipe the outside of the appliance thoroughly with a damp cloth to remove all traces of acid which may damage the finish. IMPORTANT: Ensure that the electrical connections are completely dry before using the appliance. · · 3 HINTS AND TIPS Cleaning and maintenance WARNING: Always disconnect the plug from the mains and allow the appliance to cool before cleaning. IMPORTANT: Do not use abrasive cleaners on the outside of the appliance which may scratch the surface. HELPLINE If you have any difficulty with your appliance, do not hesitate to call us. [. . . ] See usage limitations within the location safety instructions. Morphy Richards has a policy of continuous improvement in product quality and design. The company, therefore reserves the right to change the specification of it's models at any time. 6 43733 rev 2:x 18/12/2009 16:15 Page 3 Upon registration with Morphy Richards (UK & ROI only) Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only) www. morphyrichards. co. uk Brushed steel jug kettle Please read and keep these instructions Getting the best from your new kettle. . . Safety first Always pour water slowly and carefully to prevent the splashing of scalding water. Empty the water out of the kettle after first boiling To clean away any deposits that are left in the kettle after the manufacturing process. Descale as appropriate for the hardness of the water in your area It is important to descale as the performance of the kettle for auto switch-off will be impaired. Fast boil kettles perform differently If your kettle is a fast boil model, it may sound louder during boiling, and switch off suddenly with no after noise - this is normal. KT43733 MUK Rev 2 If you have a problem or complaint, please call our dedicated UK based helpline before returning your product to the retailer from where it was purchased. UK Helpline: 0844 871 0954 Replacement Parts: 0844 873 0720 Ireland Helpline: 1800 409 119 43733 rev 2:x 18/12/2009 16:15 Page 4 IMPORTANT SAFETY INSTRUCTIONS The use of any electrical appliance requires the following common sense safety rules. Primarily there is danger of injury or death and secondly the danger of damage to the appliance. These are indicated in the text by the following two conventions: WARNING: Danger to the person!In addition, we offer the following safety advice. Mains lead · Do not let the mains lead hang over the edge of the worktop where a child could reach it. · Extreme caution must be used when moving a appliance containing hot liquid. Do not touch hot surfaces, use handles or knobs. Always close the lid if applicable and always have the filter in place, otherwise the kettle may not switch off automatically and may spit out boiling water. Avoid contact with emitting steam when the water is boiling or just after it has switched off. Take care if opening the lid of the appliance when hot. Do not open the lid whilst the water is boiling. Do not fill above the MAX mark, otherwise boiling water may be ejected. Do not hold the switch in the on position or tamper with the switch to fix it in the on position as this may cause damage to the switch-off mechanism. Allow to cool before putting on or taking off parts and before cleaning. Do not move the kettle when switched on. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Ensure that the kettle is switched off before removing it from its base. · · Do not let the lead run across an open space, e. g. Do not let the lead run across a cooker or other hot area which might damage the cable. · · Do not place the kettle where the mains lead could fall into a sink. [. . . ] Always ensure that the appliance is filled till the water is visible through the level indicator. Boil only as much water as you need as this saves electricity. Place the appliance on the base unit, ensuring the appliance locates on to the 360° connector. The 360° connector allows the appliance to be located at any position - ideal for left and right handed users and convenient positioning on the worktop. [. . . ]