User manual MORPHY RICHARDS ADVANCED FINISH SEMI ELECTRONIC IRON

[. . . ] Let the iron cool completely before putting away. Loop the cord loosely around the iron before storing. The iron must not be left unattended while it is connected to the supply mains. When placing the iron on its heel, ensure that the surface on which the heel is placed is stable. [. . . ] Delicate fabrics such as silk, wool, velour, etc, are best ironed with an ironing cloth to prevent shine marks. BEFORE USE Sort out the items to be ironed according to the type of fabric. This will minimise the frequency of temperature adjustment for different garments. 4 UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119 RN40740MUK Rev3:RN40740 MUK Rev3 20/02/2009 09:20 Page 5 A 1 FILLING A Make sure that the iron is not plugged in, then set the steam dial / to `0' position before filling the iron with water. Lift up the filler cap > and fill the water through the filling hole into the water tank ·, using the beaker provided A. IN HARD WATER AREAS, THE USE OF DISTILLED OR DEMINERALISED WATER IS RECOMMENDED. WARNING: Never use battery topping up fluid or water containing any substances like starch, or sugar, or defrosted water from a refrigerator. 3 Always pour out the remaining water after use. WARNING: When filling your iron with tap water, always use the beaker provided. Never fill directly under the tap. · · · Default setting + 3-dot (cotton) To increase temperature press the top button. To decrease temperature press the bottom button. The light panel will flash to indicate that the iron has not yet reached the correct temperature. Once the correct temperature has been reached, the light will stop flashing and there will be one `beep' to signal that the iron is now ready for use. 2 · · FEATURES OF YOUR IRON Dry ironing You can use your iron as a dry iron only. Make sure the variable steam control / is set to the `0' symbol. Any temperature setting may be used depending on the garment. The spray feature may be used, provided there is water in the tank (see `Filling' section). You do not need to put any water in the tank when dry ironing only. TEMPERATURE CONTROL B B Water Spray C Increase temperature Decrease temperature Press the spray button < and aim the spray of water at stubborn creases. You can do this whilst dry ironing providing there is water in the tank. When using the water spray it may be necessary to push the button a few times to get the spray pump primed. C < For details of other Morphy Richards products, please see our website: 5 RN40740MUK Rev3:RN40740 MUK Rev3 20/02/2009 09:20 Page 6 D Steam off Variable steam Fill the iron with water as described in `Filling', page 4, and insert the plug into the electrical socket. The steam output can be varied from low to high by turning the variable steam control D. When using the iron at the bottom of the steam range, the steam output should be adjusted to the low setting. The steam facility should only be used on garments which are suitable for ironing at 2, 3-dot and MAX setting. prevent water escaping from the soleplate when the iron is too cold. During use, the no drip system may emit a loud click, particularly during heat-up or whilst cooling down. This is perfectly normal and indicates that the system is functioning correctly. `MAX' steam Auto shut-off Your iron is fitted with the auto shut-off function, it will automatically shut down after a set period. [. . . ] This guarantee is valid in the UK and Ireland only. 7 · EXCLUSIONS Morphy Richards shall not be liable to replace or repair the goods under the terms of the guarantee where: 1 The fault has been caused or is attributable to accidental use, misuse, negligent use or used contrary to the manufacturer's recommendations or where the fault has been caused by power surges or damage caused in transit. The appliance has been used on a voltage supply other than that stamped on the products. Repairs have been attempted by persons other than our service staff (or authorised dealer). The appliance has been used for hire purposes or non domestic use. [. . . ]