User manual MORPHY RICHARDS FLEECE HEATED MATTRESS COVER 75255

[. . . ] · Personal safety · WARNING: This appliance is not attended for use of persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the application by a person responsible for their safety. Do not use with a helpless person, an infant or a person insensitive to heat. Young children should be instructed on how to operate the controls safely and heat settings should be controlled by a parent or guardian. Children should be supervised to ensure that they do not play with the appliance. [. . . ] If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted. Warning: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet. Should the fuse in the 13 amp plug require changing, a 3 amp BS1362 fuse must be fitted. This appliance does not need to be earthed. It is a double insulated product. · · · · · · · · · · WARNING: When storing the appliance allow it to cool down before folding. 3 75255 rev1 9/3/07 08:56 Page 4 BEFORE USE Before using this appliance ensure that the voltage indicated on the product corresponds with the mains voltage in your home. If you are in any doubt about your supply, ask your electrical dealer or local electricity company. SAFEGUARD OVERHEAT PROTECTION SYSTEM Activation The system will remain dormant indefinitely as long as the blanket is operating in the normal temperature range. If for any reason the blanket is operated in an abnormal situation or condition which would otherwise have induced a rapid temperature rise high enough to constitute a hazard the OVERHEAT SYSTEM should intervene by cutting off the supply current before the temperature reaches the point at which damage may occur. It is normal for the lead from the blanket to the switch to become warm as this is part of the heater protection circuit extended to the switch. In the event of the OVERHEAT SYSTEM operating, the blanket will cease to function. WARNING: Do not attempt to use the blanket with controls other than those supplied with the unit as referred to on the rating label attached to the blanket. Dual control models On double dual models users are able to control their own side of the bed with individual controls, tailoring independent temperatures to independent needs. Each side of the blanket has a completely separate element and each is supplied with its own independent mains lead. Do not connect both flexible cords to one 13amp plug. The two leads should preferably be plugged into individual sockets. However, if only one socket is accessible, then a multi adaptor should be used. WARNING: No attempt should be made to repair the blanket or have it repaired locally and the switch supplied must never be replaced since the specialised components are not generally available. The fact that this blanket incorporates the overheat system does not absolve the user from observing these instructions. WARNING: If you are unsure about electrical connections please contact a qualified engineer. It is quite normal for the switch to become warm as the components encased are part of the protection circuit. 4 UK Helpline 0870 060 2614 Ireland Helpline 1800 409119 75255 rev1 9/3/07 08:56 Page 5 Mattress covers with elasticated skirt. · NOTE: This product can be used with any type of bedding including waterproof bed protectors. Place the mattress cover directly on the mattress. Making sure the control switch end is at the head of the bed, with the connector facing upwards. A Fit the shaped corners to the mattress and turn the elasticated edges of the skirt under the mattress. Ensure all creases are smoothed out and the skirt fits tightly round sides of the mattress. · · · A 5 75255 rev1 9/3/07 08:56 Page 6 HOW TO USE 1 Ensure the blanket is fitted to the bed correctly, see diagram A. · Only use a washing machine with a drum large enough to take the blanket without forcing it in. be stretched back to its original size whilst wet. NOTE: Please ensure washable models are fully dry before use. 2 Plug the power lead into the closest socket, using an extension lead if needed to ensure that the lead is not stretched. 1 Measure the blanket so it can Preheating the bed 1 Move the heat setting on the control switch to heat level 2 or 3, depending on the level of the heat required. Allow approximately 60-90 minutes for the blanket to heat the bed thoroughly, although this time may vary depending on the room temperature and type of bedding used. Machine washing 1 Unplug the blanket from the power socket. 40º 2 Disconnect the control switch and cord from the blanket by lifting the locking lever over the raised button and pull apart B. 3 Wash on the wool setting at 40°C. All night use NOTE: Blankets are perfectly safe to be used all night. However we recommend using the heat setting below. 4 Gentely stretch the blanket back to its original shape and size before drying without applying clothes pegs to wired areas of the blanket. [. . . ] In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced. If the fault develops after 28 days and within 36 months of original purchase, you should contact the Helpline number quoting Model number and Serial number on the product, or write to Morphy Richards at the address shown. You may be asked to return a copy of proof of purchase. Subject to the exclusions set out below (see Exclusions) the faulty appliance will then be replaced and dispatched usually within 28 working days of receipt. [. . . ]