User manual MORPHY RICHARDS IB28010

[. . . ] Replace the battery compartment cover (8). To set the time 1 2 3 4 Press the TIME button (7) once. The time set indicator will be displayed. You now have approximately 5 seconds to start setting the time. Press the MINUTE/HOUR button (6) once to move the minute hand clockwise by 1 minute. [. . . ] The alarm set indicator will be displayed. Press the MINUTE/HOUR button (6) once to move the minute hand clockwise by 1 minute. Press and hold the MINUTE/HOUR button, the minute hand will move automatically until 8 minutes and then the hour hand will start moving instead. Release the MINUTE/HOUR button and press to set the minutes, each press will move the hand by one minute. After setting the desired alarm time, the alarm set indicator will disappear automatically after a few seconds and the clock will return to the current time. Electro luminescent light This unit is equipped with a light for easy viewing. You can push any button on the front panel including the SNOOZE button to switch on the light. After 8 seconds the light will automatically switch off. P. 3 14 8 Function switch Alarm buzzer Alarm radio Radio off Radio on Time set indicator Sleep set indicator Alarm set indicator P. 2 P. 4 If the function switch is set to either radio on or off then the alarm defaults to buzzer if the alarm on indicator is lit. Note: Ensure that the alarm on indicator is lit. Sleep operation Your clock radio is equipped with a sleep function that will turn the radio on and switch it off automatically after a set period of time. 1 2 3 4 5 6 Press the SLEEP (4) button once the display defaults to 1:30 ie. 1 hour 30 minutes and the sleep set indicator will display. If you wish to reduce the sleep time press the SLEEP button once followed by the MINUTE/HOUR button. setting the sleep time to 12. 05 will give 5 minutes sleep time. Once the sleep time has been set, press the SLEEP button twice the radio will now come on and play for the set time. Set the FUNCTION SELECTOR switch to alarm buzzer, alarm radio or radio off. The sleep function will not work when set to the radio on position. After the set sleep time has elasped, the radio will automatically switch off and the sleep on indicator will disappear. To switch off before the set sleep time has elasped press the SLEEP button twice to deactivate the sleep indicator. Setting the alarm mode 1 Set the desired alarm time as previously described. Press the alarm set button once, the alarm on indicator will display. Select which type of alarm you require as follows:To wake up to the radio 1 2 Set the radio as described previously `to play the radio' 1-3. Set the FUNCTION SELECTOR switch (12) to the alarm radio position. Ensure that the station will be transmitting at the chosen alarm time. To wake up with the buzzer 1 2 Set the FUNCTION SELECTOR switch (12) to the BUZZER position. [. . . ] If your product proves to be defective within 28 days of purchase, your Morphy Richards dealer from whom the product was purchased will be pleased to replace it free of charge. Technical specification Batteries Clock Radio Radio :4 batteries 1. 5V Type `AA' (not included) :FM 88Mhz - 108Mhz :MW 540Khz - 1605Khz Should your product develop a defect within the guarantee period but after the replacement period, please return the product to the following address, together with the proof of purchase, brief details of the symptoms and your own name and address. After Sales Division Morphy Richards Limited Talbot Road Mexborough South Yorkshire S64 8AJ Your post office will provide a certificate of posting. The product will be repaired and returned to you promptly. If you need any further advice, please call our Helpline (UK local rate) on: 08450 777700 (Mon-Fri) Warning labels ATTENTION: For safety reasons, do not remove the cover. [. . . ]