User manual MORPHY RICHARDS IB29003

[. . . ] 1 2 3 4 5 Slide the FUNCTION SELECTOR switch (15) to select MW or FM. Adjust the VOLUME control (16) to a suitable level. Slowly adjust the TUNING control (24) to select your desired station. The FM LED indicator (23) will light up when an FM stereo signal is received. [. . . ] Press the PLAY MODE button twice and the ALT indicator will light up. The ALT button can be pressed at any time to check track selection. Press the POWER button, the power indicator will go out. Set the ALARM selector switch to AUTO; the alarm indicators will light up. At the wake time, the unit will playback the whole cd or the programmed tracks. The player will remain in operation for 1 hour. To stop playback, press the POWER on/off button. REPEAT button 1 Press once for repeat of current track. 2 Press again for the whole cd to be repeated, the indicator will light. 3 Press again to cancel the repeat function. PLAY MODE 1 Press playmode button for random playback of all cd tracks. The playmode LED indicator will light up. Repeat and random modes can be used simultaneously. When the cd compartment is empty or a cd is incorrectly loaded or damaged the no (no disc) symbol will be displayed. 3 4 If the cd contents or the programmed tracks are less than 1 hour, then playback will stop at the end of the cd or programmed tracks. Program Use ALT button to program (see point 2 of waking to cd music). Press the PLAY MODE button twice to select program, ALT indicator will light up. When ALT LED indicator is lit, press PLAY to play programmed cd track. Waking up to buzzer Set alarm selector switch to BUZZER; the alarm indicators will light. Buzzer will sound when the alarm time is reached. How to cancel the alarm The alarm is programmed to sound for 1 hour. 1 SNOOZE; press this button to temporarily stop the alarm (display will start flashing). The alarm will sound again 6 minutes later. 2 POWER on/off; press to stop the alarm, the alarm will sound again 24 hours later. 3 Switch alarm selector switch to the off position to cancel alarm permanently, indicators will disappear. Setting alarm The unit allows you to select two different wake-up times that can be used separately or simultaneously (ALARM 1 OR 2 OR ALARM 1 and 2). Before setting the alarm move the selector to either alarm 1 or alarm 2 or alarm 1 and 2. ALARM 1: Press and hold the alarm 1 button, and then or to set the desired wake-up time. ALARM 2: Press and hold the alarm 2 button and proceed as above. [. . . ] Before playing, clean the cd with a clean cloth. After playing, store the disc in its cd case. The cd clock radio is for indoor use only. Warning labels WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture. ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. [. . . ]