User manual MORPHY RICHARDS IB48950

[. . . ] WARNING: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet. Should the fuse in the 13amp plug require replacement, a 5 amp BS1362 fuse must be fitted. WARNING: This appliance must be earthed. · Other safety considerations · Disconnect the appliance from the mains supply when not in use, before taking off attachments and before cleaning. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. [. . . ] When processing small pieces of food, unlock and use the small food pusher, leaving the large pusher in place in the lid H. WARNING: Do not use the small food pusher without the large food pusher being in place in the lid feed tube. When the processing is complete, remove the blade from the bowl before removing the processed food. Dough blade Fit the processor bowl into place as described in `Setting up'. Place the dough blade on the detachable drive shaft. Fit the lid and slot into place, make sure that it clicks. Turn the processor on and operate until the dough has formed into a small ball. Remove the blade from the bowl before removing the dough. IMPORTANT: When kneading dough, do not operate the machine longer than 30 seconds. Afterwards, wait at least 2 B C 6 FITTING AND USING THE TOOLS In general, all attachments (with the exception of the mini processor bowl and small blade) which are fitted within the processor bowl must be firmly attached to the detachable drive shaft. Always adjust the attachments until you are sure that they are correctly fitted. Detachable drive shaft Insert attachments over the top of the detachable drive shaft and ensure that they are securely clicked into place. Then remove the blade covers (if applicable), taking care as the blades are sharp E. 1 2 Chopping blade Fit the processor bowl as detailed previously. Fit the chopping blade over the motor drive, and fit firmly into place F. Warning: Use extreme caution - the blades are sharp. Always handle the chopping blade by its central plastic section. Fit the lid and click into place as D E 7 F 1 2 3 4 5 6 G H www. morphyrichards. com 7 48950-Rev1 23/5/06 11:18 Page 8 minutes before operating the machine again. Warning: For safety, always leave the pusher in place whilst operating the processor. 1 2 3 4 5 6 Whisk attachment Fit the processor bowl as detailed previously in `Setting up'. Place the whisk attachment onto the motor drive. Fit the lid, food pusher and click into place as detailed in `Setting up'. [. . . ] 4 5 All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced. If the fault develops after 28 days and within the guarantee period from the original purchase date, you should contact the Helpline number quoting Model number and Serial number on the product, or write to Morphy Richards at the address shown. You will be asked to return the product (in secure, adequate packaging) to the address below along with a copy of proof of purchase. [. . . ]