User manual MORPHY RICHARDS IBCD1904

[. . . ] Contents Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Information regarding plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Battery Back-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press and hold the TIME button (14) and simultaneously hold down the SKIP SET button (7) will adjust the clock time in the reverse direction. The PM indicator (21) will illuminate to indicate 12. 00 midday has been reached. 2. 3. 4. 5. Power On and Off The unit must be switched on before the radio or CD functions can operate. Switch the unit on by pressing the power ON button (12). Switch the unit off by pressing the power OFF button (13). Setting the Clock Alarm Time The alarm function can be set to operate on the following functions: wake to radio, wake to buzzer alarm or wake to any CD programmed track. Press and hold the ALARM button (11) and simultaneously hold down the SEARCH SET button (8). The clock display (25) will advance the minutes and hour segments. Release all buttons when the correct alarm time is reached. Press and hold the ALARM button (11) and simultaneously hold down the SKIP SET button (7) alarm time will adjust in the reverse direction. 2. If you need any further advice, please call our Technical Helpline on 08450 777700 (Mon-Fri) 7 3. Slide the Alarm switch (2) to select your wake up mode: -To AUTO position for Radio or CD alarm mode. -To BUZZ position for alarm buzzer sound. -To OFF position to turn alarm function off. Once the Alarm switch has been activated the ALARM indicator (23) will illuminate. 4. Setting the Alarm to Wake to Radio 1. Set the required alarm time by pressing and holding the ALARM button (11) and simultaneously the SEARCH SET button (8) to fast forward or the SKIP SET button (7) to reverse. Select the required waveband by sliding the FUNCTION switch (18) to either FM or MW and turning the TUNING control (17) to the station you wish to use for the alarm. (If the FM station is being received in stereo the FM STEREO indicator (26) will light). Set the VOLUME control (3) to the desired level. Slide the ALARM switch (2) to the AUTO position. (The ALARM indicator (23) will illuminate. To stop listening to the radio press the power OFF button (13). 2. 3. 4. 5. Ensure the radio station will be transmitting at the preset alarm time. Setting the Alarm to Wake to Buzzer At the desired wake up time the buzzer can be set to operate. If you do not switch off the buzzer it will sound for approximately 1 hour and then automatically switch off. If you press the power OFF button (13) the alarm will operate again 24 hours later. [. . . ] To return to the beginning of the playing track press the SKIP SET button or press repeatedly to skip backwards several tracks. To skip backwards through the current track press and hold the SKIP SET button. 2. REPEAT button (6) 1. Press the repeat button to repeat the whole CD. The CD repeat indicator (20) will illuminate. [. . . ]