User manual MORPHY RICHARDS IBCR1910

[. . . ] 5 The PM indicator (18) will illuminate to indicate 12. 00 midday has been reached. Battery back-up facility Your alarm clock radio is equipped with a battery back-up facility. 1 2 3 Remove the battery compartment cover (located underneath the unit) by pressing down and sliding off the battery cover . Insert a battery size 9 volts PP3/6LR61 (Ensure batteries are inserted correctly) Replace the battery compartment cover. Power on and off The unit must be switched on before the radio can operate. 1 Switch the unit on by pressing the RADIO ON button (5). [. . . ] In the interests of environmental safety : dispose of batteries safely. P. 3 P. 4 Setting the alarm to wake to buzzer 1 2 Slide the Alarm Mode switch (4) to select your wake up mode: -To BUZZER position for alarm buzzer sound. Once the alarm switch has been activated the ALARM indicator AL1 (19), AL2 (21) will illuminate. Snooze function You can press the SNOOZE button (8) after the alarm has sounded which allows 7 minutes of snooze time. After 7 minutes the alarm will sound again. 1 When the alarm or buzzer sounds press the SNOOZE button (8). (The snooze default is set for 7 minutes and then resumes). Setting the alarm to wake to radio 1 Set the required alarm time by pressing and holding the ALARM button (9) and simultaneously the FAST SETTING button (11) to fast forward or the SLOW SETTING button (10) to adjust alarm time slowly. Select the required waveband by sliding the BAND switch (12) to either FM or MW. Press the RADIO ON button (5) to turn on the radio. Turn the TUNING control (13) and the DIAL SCALE (20) will point to the station you wish to use for the alarm. Adjust the VOLUME control (15) to the desired level. Slide the alarm selector (3) to the AL1 position, AL2 or AL1+ AL2 position. Slide the alarm mode switch (4) to the AUTO position. Once the Alarm switch has been activated the ALARM indicator AL1 (19), AL2 (21) or (19) and (21) if both alarms are required will illuminate. To stop listening to the radio press the OFF button (6). The snooze function will cease to operate after 59 minutes. Sleep function The sleep function sets the unit to play the radio whilst you go to sleep and will switch off after a set time. 1 2 3 4 Slide the band selector switch (12) to FM or MW. To use the sleep facility press the SLEEP button (7), (The sleep default is set for 59 minutes after which time the unit will automatically switch off). The sleep time can be varied between 59 minutes to 1 minute. To set your own sleep time, press the SLEEP button (7) together with the FAST SETTING (11) button to fast forward the minute and hour segments. Press and hold the SLEEP button (7) and simultaneously hold down the SLOW SETTING button (10) will adjust the minute and hour segments slowly. Release the buttons when the required sleep time is reached. If you want to turn off the music before the end of the programme press the OFF button (6) or the SNOOZE button (8). 2 3 4 5 6 7 Ensure the radio station will be transmitting at the preset alarm time. 5 6 Cancelling the alarm The alarm is programmed to run for 59 minutes. 1 2 3 Press the SNOOZE button (8) to stop the alarm temporarily, the alarm will ring again in 7 minutes. [. . . ] Morphy Richards products are manufactured to internationally accepted quality standards. In addition to your statutory rights, Morphy Richards guarantee your product to be free from manufacturing and component defects for a period of TWO YEARS from date of purchase. If your product proves to be defective within 28 days of purchase, your Morphy Richards dealer from whom the product was purchased will be pleased to replace it free of charge. Should your product develop a defect within the guarantee period but after the replacement period, please return the product to the following address, together with the proof of purchase, brief details of the symptoms and your own name and address. Technical specification AC Power supply Battery back-up Radio : : : : 230v 50Hz 9V DC type 6LR61/PP3 (not included) FM 88Mhz - 108Mhz MW 540Khz - 1600Khz Warning labels WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture. [. . . ]