User manual MORPHY RICHARDS IBHA4009

[. . . ] To protect against the risk of electric shock, do not immerse the appliance in water or in any other liquids. Be sure that your household voltage corresponds to the voltage marked on the dryer. The air inlet grille should not be obstructed when the styler is in use. [. . . ] The After Sales Division Morphy Richards Ltd Mexborough South Yorkshire England S64 8AJ Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK (local rate) 08450 777700, Republic of Ireland 1800 409119 300w Hot air styler with multi-attachments MODEL : HA4009 Wiring This product is fitted with a 13A (BS1363) plug. Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A. C. If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted. IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET. Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The Company, therefore, reserves the right to change the specification of its models at any time. CP 4009 Issue 1 04. 00 Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ Instructions & Style Guide Thank you for buying your new 300w Essentials Hot Air Styler from Morphy Richards. Please read these instructions carefully before use and keep in a safe place for future reference. Styling The vent bristle brush - can be used to shape, it is suited to general styling and creating a textured look. Rough dry your hair, using a Morphy Richards hairdryer, before using your Hot Air Styler. Set your Hot Air Styler on the highest setting. Lift a small section of hair onto the vent bristle brush and brush downwards, maintaining tension. Repeat on all sections of hair until the desired result is achieved. Using the Volumising attachment Set the Hot Air Styler on the highest setting when the hair is at its most wet. Place fingers of the styler to the head allowing the roots to dry first which creates maximum volume. Stroke the brush from the roots to the ends of each section of hair and then rotate the handle to wind the hair round the brush, winding inwards towards the scalp. Leave for 20-30 seconds (depending upon the length and thickness of hair) then unwind carefully. Repeat all around head. Key Features Styling Tips Your Hot Air Styler is one of the most important beauty aids you own, and the way you use it has a significant impact on the look and condition of your hair. Having shampooed your hair, ensure that it is rinsed properly as shampoo that is left in the hair will leave it looking dull. To maximise shine, rinse your hair in cool water when you have rinsed it thoroughly. Comb your hair through with a wide toothed comb to remove tangles before styling. D tong bristle brush volumiser C shaper brush B As the hair dries, lower the settings and lift the styler, working up through the hair to create height. [. . . ] To fit a new attachment, line up the locating slots on the attachment with the slots on the end of the handle and push to lock in place. Always unplug the unit before removing or fitting new attachments. A B C D E F G H 300 watts. Control switch on main barrel for easy operation. [. . . ]