User manual MOTOROLA DSR470

[. . . ] DSR470 Digital Receiver User Guide This user guide is for use with DSR470 Digital Receivers Publication #479169-001 Rev A All Rights Reserved General Instrument Corporation doing business as Broadband Communications Sector of Motorola, Inc. San Diego, California 92121 Internet: http//www. mot. com This device incorporates an anticopy process technology that is protected by U. S. patents and other intellectual property rights. The anticopy process is licensed for non-commercial home use only. [. . . ] Connect the OUT terminal(s) on the VCR to the VHF IN terminal(s) on the TV. · 36 Installation Connections to Audio/Video Monitor Complete the following steps if you only plan to connect the receiver to an audio/ video monitor: · Using standard RCA-type audio/video cables, connect the top/left TV (VIDEO output) terminal on the rear panel of the receiver to the video input terminal on the monitor (or TV using the baseband inputs). Using standard RCA-type audio/video cables, connect the two bottom/left speaker (R and L) terminals on the back panel of the receiver to the audio input terminals on the monitor (or TV using the baseband inputs). · Connections to Audio/Video Monitor and VCR Complete the following steps if you plan to connect the receiver to an audio/video monitor and VCR: · Using standard RCA-type audio/video cables, connect the top/right TV (VIDEO output) terminal on the rear panel of the receiver to the video input terminal on the VCR. Using standard RCA-type audio/video cables, connect the two bottom/right speaker icon (R and L) terminals on the Rear Panel of the receiver to the audio input terminals on the VCR. · · Using standard RCA-type audio/video cables, connect the audio and video inputs on the audio/video monitor (or TV using baseband audio/video inputs) to the outputs on the VCR. If your entertainment center is enabled for Dolby Digital AC-3 Version 5. 1 (six channel) surround sound, connect this port to one end of the orange RCA cable and the other end of the orange RCA cable to your surround sound processor. · After you complete the installation procedures, you may wish to use the on-screen menus to make adjustments to the receiver's operation. DSR470 User Guide 37 4 Additional Features Options. The Options menu provides access to all of the on-screen menus. It appears when you press the OPTIONS key on the remote control or when you press the MENU key on the receiver followed by selecting OPTIONS from the main Menu. System Settings. The System Settings menu provides access to menus which allow you to adjust the operation of your system. 38 Installation Viewing and Language Settings The Channel Information option allows you to turn the header (top of screen) and banner (bottom of screen) On or Off. The default setting is On. Subtitles. The Subtitles option allows you to select the language for subtitles (if available for the particular program) or keep them turned off. The default setting is None. Language. The Language option allows you to select the language of the onscreen menus and audio for your programs. The TV Viewing option allows you to select the size of the viewing area. Select the Standard option if your TV screen is a typical screen with a 4:3 ratio of width to height. Select Wide if your TV screen is a wide screen with a 16:9 ratio (as in HDTV's or digital TV's). The default setting is Standard. DSR470 User Guide 39 4 Audio Settings If you are in CBL mode (digital) broadcast, three options appear on the Audio Settings menu. 1. Select option 1 (Audio Connections), and you will be able to select either TV or HiFi (the default is TV). Select TV if the receiver's AUDIO OUT port is connected to your TV. Select HiFi if it is connected to your stereo system. 2. Select option 2 and then select Mono, Stereo, Surround or Dolby Digital (the default is Surround). The Dolby Digital selection will disable other audio ports. 3. Select Mono, Stereo or SAP (Secondary Audio Program) for your analog cable TV programming (channel numbers normally under 100). The default is Stereo. 40 Installation Installation Settings Channel Signal Strength. [. . . ] When you call or write, explain the problem. Ask whether the component should be returned for service or retained by you for servicing in place. Ask for a Return Service Authorization (RSA) number and for the address to send the component if the component is to be returned. (If you write, be sure to include a copy of your sales receipt or other proof of purchase date, a copy of your warranty, your phone number, and return address. [. . . ]