User manual MOTOROLA EASY START KIT HMEZ1000

[. . . ] Home Monitoring & Control System Safety, Regulatory and Copyright Information FCC ID NUMBER: OU4-XBX200 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT. CAUTION: TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES. [. . . ] Your USB Gateway must have an active connection to the Internet when using this procedure. SMTP (E-mail) Setup 1 2 Click Click configuration: from the main menu. The Edit SMTP INFO window is displayed with a sample 3 Enter the Outgoing Mail (SMTP) and your E-Mail Address necessary for your mail server. If your server requires authentication, select the checkbox and enter the necessary information. The Account Name and Password are for your Authentication Server, if using one. You are now able to set up profiles to send event notifications. 4 37 MHM User Guide Home Monitoring & Control System Working with the MHM Program Profile Setup You can set up different profiles (methods of communication) here. For example, you can set up an e-mail and an e-mail-ready cell phone profile, to ensure that when something occurs, you are notified. 1 2 Click Click window is displayed: from the main menu. The Edit Profiles 3 4 5 6 Select the Notification Type. The Profile configured displays in the Profiles List. You will now be able to select this profile when setting up an event action. Click Done to exit. Remove a Profile 1 2 3 4 Click Event Setup from the main menu. 38 MHM User Guide Working with the MHM Program Home Monitoring & Control System Edit a Profile Use this procedure to alter existing profiles. 1 2 3 4 Click Event Setup from the main menu. Highlight the profile, re-type the correct e-mail address and click Update. Click Done to exit. 39 MHM User Guide Home Monitoring & Control System MHM Archives Archives The Archive acts as a storehouse for the events generated by your Motorola Home Monitor and Control system. Each image, video clip, or sensor event stored in the archive folder is represented by a thumbnail image. Click from the main menu to access your stored events. 40 MHM User Guide MHM Archives Home Monitoring & Control System View an Event 1 To open and view and event, double-click the event desired. 2 View the event. If the stored event is a stored video like the example, click video. to play the Delete an Event 1 Select an event by clicking its check box. Or, choose Select All from the menu at top to select every event on the current page. 2 Click to delete the selected events. A warning prompt is displayed. 3 Click Yes to delete the events. 41 MHM User Guide Home Monitoring & Control System Discovery Discovering New Hardware This section describes how to connect your system and only applies if you have already successfully set up your MHM program. Discover New Devices For your MHM program to communicate with your wireless devices, they must be registered. The MHM program establishes a dedicated wireless network with all discovered Motorola home/office automation devices and works with only those devices that it has discovered. Once the device is ready to be installed (it is powered and physically close to the Gateway), the unit requires activation. Use the following procedure to discover Motorola Home Monitoring and Control System devices: 1 Log in to your MHM program, Start > Programs > Motorola Home Monitor > Motorola Home Monitor. [. . . ] It is expressed as a sequence of 12 hexadecimal digits printed on the unit's label. You need to provide the MAC Address to the cable service provider. Also called an Ethernet address, physical address, hardware address, or NIC address. MB One megabyte; equals 1, 024 x 1, 024 bytes, 1, 024 kilobytes, or about 8 million bits. [. . . ]