User manual MOTOROLA H385

[. . . ] The indicator light turns on when the battery is charging. It may take up to 30 seconds for the light to turn on. When the headset's battery is fully charged (about 3 hours), the indicator light is steadily lit in blue. Bluetooth Link > Setup. 2 Scroll to Power. [. . . ] 2007. 3 PAIR CONTINUED Your Phone 4 TEST AND USE Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: Your phone and headset are now paired and connected to make and receive calls. To make a call: 1 On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. 1 Place headset ear bud on your ear with the earhook also securely fitted over your ear. 2 On the phone, dial the number you want to call and press SEND key on your phone. 2 Select Motorola H385. 3 Select OK or Yes to pair your headset with 4 5 your phone. Enter the passkey: 0000 Select OK. 3 If your phone and headset are successfully After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time by pressing and holding the Power button. paired, you will hear ringing on the headset. When your headset successfully pairs with your phone, the indicator light flashes purple and blue. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. USING YOUR H385 See Features and Functions Guide on the reverse side for information on using your H385 TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, first turn off the other device, then turn your headset off and on. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/Bluetoothsupport Features and Functions Guide TURNING HEADSET ON AND OFF To turn your headset on, press and hold the Power button until the indicator light flashes. To turn your headset off, press and hold the Power button until the indicator light flashes rapidly and then turns off. Power Button IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H385. Indicator Light WEARING THE HEADSET Your H385 headset is supplied with both roundand oval-shaped earbuds to provide personal choice for maximum comfort. The earbud is fitted onto the end of your headset's earpiece speaker, and placed onto your ear when using your headset as shown. CHANGING FOR USE ON OTHER EAR You can wear your H385 headset on your left or right ear. [. . . ] Indicator Light Red Purple Blue Charge Level Battery at less than 10% charge Battery at between 10% and 80% charge Battery at more than 80% charge End a call Answer a call Ignore a call Redial last call CHARGING STATUS With the Charger Plugged In Indicator Light Charge Status Red Charging (battery level less than 10% charge) Purple Charging (battery level more than 10% charge) Blue Charging complete Mute or unmute a call Note: Some features are phone/network dependent. Note: Your H385 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. [. . . ]