User manual MOTOROLA H390

[. . . ] Under normal use, the expected life of the rechargeable battery is approximately 400 charges. 3 PAIR Your Headset Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Power on headset by sliding the Power switch towards the microphone to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. Indicator Light (steadily blue for pairing) Power Switch If the headset does not enter pairing mode, see TROUBLESHOOTING for help. Motorola, Inc. [. . . ] After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. Note: If desired, your headset can be restored to original factory settings. This action will erase all pairing information stored in your headset. Thus, you will need to pair your phone and headset again (see step 3). Note: To restore your headset to original factory settings, press and hold both Volume buttons and the Call button at the same time for 10 seconds. TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). If you need more help, contact us at 1-877-MOTOBLU or visit us at www. motorola. com/Bluetoothsupport Features and Functions Guide H390 Bluetooth® Handsfree Headset TURNING HEADSET ON AND OFF To turn your headset on, slide the switch toward the microphone. The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired). To turn your headset off, slide the switch toward the charging plug. The indicator light flashes three times then turns off. IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H390. Indicator Light Power Switch EARBUDS AND YOUR HEADSET Your H390 headset is supplied with multiple earbuds. The earbud is fitted onto the end of your headset's earpiece speaker, and placed onto your ear when using your headset. WEARING THE HEADSET To wear your headset, flex the earhook and loop it over your ear as shown. Your headset's performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied earbuds with your headset. Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort. CHANGING FOR USE ON OTHER EAR You can wear your H390 headset on your left or right ear. [. . . ] You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www. motorola. com/rtte. To find your DoC, enter the product Approval Number from your product's label in the "Search" bar on the web site. To save battery power, turn OFF the headset when you don't use it for an extended time by sliding the switch towards the charging plug. Note: Your battery is designed to last the life of the product. It should only be removed by a recycling facility. [. . . ]