User manual MOTOROLA H5

[. . . ] Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. [. . . ] The indicator light will initially flash, but continue to hold down the button until the indicator light is steadily lit. If the indicator light is flashing or not steadily lit when releasing the button, repeat both steps 1 and 2 on this page. 3 TURN ON BLUETOOTH ON YOUR PHONE AND PAIR WITH HEADSET TURN ON BLUETOOTH ON YOUR PHONE AND PAIR WITH HEADSET Select [Look for Devices]. 4 TEST AND USE Your phone and headset are now paired and ready to make and receive calls. To make a call: USING YOUR PORTABLE CHARGER BASE USING YOUR H5 See Features and Functions Guide on the reverse side for information on using your H5. Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. 7 1 Place the headset in your ear. The eartip To turn on Bluetooth: 1 Select M (Menu) > Settings > Connection > Note: Do not select STOP--you will automatically be taken to the next screen. should be inserted so that the headset feels comfortable and forms a seal in the ear. Bluetooth Link > Setup. 8 Select Motorola Miniblue. 9 Select Yes to bond. 2 Scroll to Power. 4 Select On. Note: See "Eartips and Your Headset" on the reverse side of this guide for more information on using eartips with your headset. The portable charger base provided with your headset can be used to cordlessly recharge your headset anywhere. Once charged, the portable charger base provides power on-the-go, extending your talk time by constantly "topping off" your headset's battery. Using the included Motorola power supply, you can charge both the portable charger base and headset at the same time. The portable base charger provides two indicator lights for charging status. See "Indicator Lights" in the reverse side of this guide for information on these indicator lights. Note: Using your PC's USB port as a power source for charging is not recommended. 10 Enter the passkey 0000 and select OK. 2 On your phone, dial the number you want to call and press the SEND key. 5 Select Back. When your headset and phone are successfully paired, the indicator light on your headset will change from steadily lit to flashing. Note: This procedure is for most Motorola phones. For other phones, see your phone's user's guide or visit www. hellomoto. com/bluetoothsupport and click Set Up My New Product. 3 If your phone and headset are successfully After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. paired, you will hear ringing on the headset. 6 Select Handsfree. TURNING ON AND OFF Miniblue H5 Bluetooth® Handsfree Headset To turn your headset on, press and hold the Call button until the indicator light flashes. To turn your headset off, press and hold the Call button until the indicator light flashes rapidly and then turns off. [. . . ] Phone network not available Mute enabled Mute disabled Headset powering on Headset powering off Put an active call on hold or resume a call on hold Transfer a call from the phone to the headset Disable or enable the indicator light Mute or unmute a call Single high tone repeated every 5 sec. Two ascending tones Two descending tones Four ascending tones Four descending tones Note: Your H5 supports both Handsfree and Headset Profiles. [. . . ]