User manual MOTOROLA H555

[. . . ] For most Motorola phones (at the main menu): 1 Press M (Menu) > Settings > Connection > 1 Verify slide switch is in the off position (toward the charging port). Bluetooth Link > Setup. 2 Plug the Motorola charger into the end of the headset. The indicator light turns red when the battery is charging. [. . . ] 2 On the phone, dial the number you want to call and press SEND key on your phone. 3 If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time by sliding the switch towards the charging plug. your phone. 4 Enter the passkey: 0000 5 Select OK. 2 Select Motorola H555. 3 Select OK or Yes to pair your headset with When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. USING YOUR H555 See Features and Functions Guide on the reverse side for information on using your H555 TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. [. . . ] The indicator light is either steadily lit or flashing in blue. Product Approval Number Volume Buttons The above gives an example of a typical Product Approval Number. Slide Switch You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www. motorola. com/rtte. To find your DoC, enter the product Approval Number from your product's label in the "Search" bar on the web site. MAKING CALLS Function Receive a call Mute or unmute a call Reject a call Action Tap the Call button Tap both Volume buttons Press and hold a Volume button until you hear two descending tones Tap the Call button Press and hold the Call button until you hear two ascending tones Tap the Call button and speak the name after the tone MAKING CALLS CONTINUED Function Answer a second incoming call End an active call and resume a call on hold Disable the indicator light Action Tap the Call button Tap the Call button First slide the switch toward charging plug (to turn headset off), then press and hold both Volume buttons AND slide the switch towards the microphone (to turn headset on) End a call Redial last call Make a voice dial call Note: Some features are phone/network dependent. Note: Your H555 supports both Handsfree and Headset Profiles. [. . . ]