User manual MOTOROLA H680

[. . . ] Disconnect the charger. Note: Headset is not functional while charging. 2 START BLUETOOTH FEATURE Your Phone 3 PAIR Your Headset Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones (at the main menu): 1 Press M (Menu) > Settings > Connection > Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Remove headset from charging base and power on by sliding Power switch to the On position (towards Power symbol on headset). [. . . ] The indicator light flashes to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. Bluetooth Link > Setup. 2 Scroll to Power. 5 Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. Indicator Light (steadily blue for pairing mode) If the headset does not enter pairing mode, see TROUBLESHOOTING for help. Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www. hellomoto. com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809510A87-O Bluetooth ID: B012842 3 PAIR CONTINUED Your Phone Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: 1 On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. 2 Select Motorola H680. 3 Select OK or Yes to pair your headset with MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/Bluetoothsupport Features and Functions Guide TURNING HEADSET ON AND OFF To turn your headset on, slide the Power switch on (towards Power symbol on headset). The indicator light is steadily purple for several seconds, then flashes blue (if paired and connected with another device) or is steadily blue (if ready to be paired). To turn your headset off, slide the Power switch off. The indicator light will turn off. IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H680. Indicator Light Power Switch EARBUDS AND YOUR HEADSET Your H680 headset is supplied with multiple earbuds. The earbud is fitted onto the end of your headset's earpiece speaker, and placed onto your ear when using your headset. WEARING THE HEADSET To wear your headset, flex the earhook and loop it over your ear as shown. Your headset's performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied earbuds with your headset. Be sure to position the ear bud into your ear canal for optimal audio performance and comfort. CHANGING FOR USE ON OTHER EAR You can wear your H680 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: STORING YOUR HEADSET The charger case provided is used to charge and store your headset. [. . . ] To change the headset for the left ear: STORING YOUR HEADSET The charger case provided is used to charge and store your headset. When not using your headset, you should place it in the charger base. Be sure to turn the headset off before placing it into the charger case. As shown, the charger cover can be placed on top of the charger case, or underneath it to provide support for desktop placement. 1 Gently lift and pull the top of the earhook up and off speaker stem as shown. 2 Flip the headset over. [. . . ]