User manual MOTOROLA HMDC5025

[. . . ] In the homesight software, click System Settings. Select "Device Discovery" from the menu. Select "Start Discovery. " After a few seconds, the System Controller will automatically find and register your sensor and details of the device will appear on the screen. Feature Locator Power Indicator Power Override button Discovery button AC receptacle 3 Features and Specifications · · · · Wireless connectivity to the System Controller LED power indicator Manual override button Discovery button Typical open air range (line of sight): Typical range indoors: Operating temperature/humidity Dimensions: Storage temperature: Communication frequency: 200 ft (60m) 60 ft (18m) 32° to 104° F with 10% to 80% humidity with all components operating within manufacturer thermal limits. 3. 66"L × 2. 20"W × 2. 24"H (56mm × 93mm × 57mm) -13º to 167º F 418 MHz 4 Troubleshooting Problem Wireless System Controller does not recognize the Power Controller during discovery Solution · · Position the Power Controller in closer proximity to your Controller and try again. [. . . ] Can my lamp automatically turn on when my camera's motion sensor is triggered?This needs to be configured in the Motorola homesightTM program. 5 Regulatory Information CAUTION: Changes or modifications not expressly approved by Motorola for compliance could void the user's authority to operate the equipment. In order to use these products, you need broadband service. Motorola cannot guarantee the availability, reliability or performance, such as speed, of the broadband service you use, which may be affected by, among other things, (i) network traffic, (ii) other services offered by your broadband service provider, (iii) the performance of your computer equipment, (iv) the performance of your service provider's network, and (v) the availability of Internet router(s). FCC Compliance Class B Digital Device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: · · · · Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Declaration of Conformity Motorola, Inc. , Connected Home Solutions, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility that the HMSM4140 complies with 47 CFR Parts 2 and 15 of the FCC Rules as Class B digital devices. Restrictions on Use of Wireless Devices In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the organization. If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization or environment, you are encouraged to ask for authorization to use the device prior to turning on the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this product or the substitution or attachment of connecting cables and equipment other than specified by the manufacturer. Correction of interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. FCC Certification This product contains a radio transmitter and accordingly has been certified as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators. Products that contain a radio transmitter are labeled with FCC ID and the FCC logo. This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. Canada--Industry Canada (IC) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. The wireless radio of this device complies with RSS 210 and RSS 102 of Industry Canada. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. Registration Register your product at: http://broadbandregistration. motorola. com 6 Limited Warranty Power Controller ("Product") Motorola warrants to you, the original end user customer, that (A) the Product, excluding Software, will be materially free from defects in materials and workmanship under normal use, and (B) with respect to Software, (i) the media on which the Software is provided will be free from defects in material and workmanship under normal use, and (ii) the Software will perform materially as described in its documentation. This Limited Warranty to you, the original end user customer, continues (A) for Software and the media upon which it is provided, for a period of ninety (90) days from the date of purchase from Motorola or an authorised Motorola reseller, and (B) for the Product (excluding Software), for a period of one (1) year from the date of purchase from Motorola or from an authorized reseller. To take advantage of this Limited Warranty or to obtain technical support, you must call the Motorola toll-free phone number (below). Motorola's sole and exclusive obligation under this Limited Warranty for retail sales shall be to repair or replace any Product or Software or refund all or part of the purchase price of the Product that does not meet this Limited Warranty. [. . . ] ALL WARRANTIES ARE VOID IF THE PRODUCT IS OPENED, ALTERED, AND/OR DAMAGED. THESE ARE YOUR SOLE AND EXCLUSIVE REMEDIES for any and all claims that you may have arising out of or in connection with this Product, whether made or suffered by you or another person and whether based in contract or tort. THIS PRODUCT IS INTENDED ONLY FOR USE TO FACILITATE HOME MONITORING AND CONTROL AND IS NOT INTENDED TO BE A SUBSTITUTE FOR A HOME SECURITY SYSTEM. MOTOROLA HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER THAT MAY ARISE FROM THE USE OR INABILITY TO USE THIS PRODUCT AS A HOME SECURITY SYSTEM. [. . . ]