User manual MOTOROLA HS815 Bluetooth Headset Quick Start Guide

[. . . ] For most Motorola phones: 1 Select M (Menu) > Settings > Connection > Release Tab Down Bluetooth Link > Setup. 1 Plug the Motorola charger into the end of the headset with the release tab facing down. The indicator light turns on when the battery is charging. [. . . ] 2005. 3 PAIR CONTINUED Your Phone 4 TEST AND USE Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: Your phone and headset are now paired and ready to make and receive calls. To make a call: 1 On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. 1 Place the headset over your ear. 2 On your phone, dial the number you want to call and press the SEND key. 2 Select Motorola HS815. 3 Select OK or Yes to pair your headset with 4 5 your phone. Enter the passkey: 0000 Select OK. 3 If your phone and headset are successfully After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time. paired, you will hear ringing on the headset. When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. USING YOUR HS815 See Features and Functions Guide on the reverse side for information on using your HS815. TROUBLESHOOTING My phone doesn't find my headset. Make sure the indicator light on your headset is on and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. [. . . ] See your phone's user's guide for more information. Note: If the link between the headset and phone abnormally disconnects (for example, out of range), the headset tries to reestablish the link. INDICATOR LIGHTS The indicator light provides information about your headset status. With the Charger Plugged In Indicator Light Headset Status On (steady) Off Charging Charging complete With No Charger Plugged In Indicator Light Off On (steady) 10 rapid flashes Slow pulse Quick flash Headset Status Power off Pairing mode Pairing successful Connected (on a call) Standby (not on call) AUDIO TONES The audio tones provide information about your headset status. [. . . ]