User manual MOTOROLA IDEN I600

[. . . ] MotorolaTM iDEN® Digital Portable i600 - Multi-Service Phone Getting Started 0 i600 GETTING STARTED CONTENTS YOUR PORTABLE PHONE . 7 Selecting All Incoming Calls and Messages . 20 i600 GETTING STARTED i Receiving Multiple Calls . 21 Entering Phone Numbers Using the Keypad . [. . . ] Press and hold the PTT button, wait for the chirp, then speak into the microphone. i600 GETTING STARTED 23 Name Method 1. Press until you see the "Name" menu option on the last line of your display. Press the key with the first letter of the name associated with the private ID. Press or to scroll through the list. 5. Press and hold the PTT button, wait for the chirp, then speak into the microphone. RECEIVING A PRIVATE CALL When you receive an incoming Private Call, you hear a brief tone. Your unit automatically switches to Private Call mode, and the Private Call ID or the name of the caller displays. Wait for the caller to finish speaking, then press and hold the PTT button. Begin speaking after you hear the chirp. RECALLING YOUR PRIVATE ID 1. To recall your phone's private ID, press 2. . Private Call CALL ALERT You can access Call Alert from the Group and Private modes. Using Call Alert, you can privately page an individual by sending an audible tone. Sending a Call Alert 1. Press until you see "Alert" on your display. Enter the private ID or press to scroll to the name of the person to whom you want to send the Call Alert. You may also select the person by using Name Search. Press the PTT button to send the Call Alert. 24 i600 GETTING STARTED Receiving a Call Alert When you receive a Call Alert, you hear a tone and see a message on your display. Press the PTT button to return the Call Alert. Press under "Clear" to clear the Call Alert, or press any key other than the PTT button to silence the alert tones. NOTE Until the Call Alert is cleared or returned, you will be blocked from receiving any additional Phone, Group, or Private calls. CALL ALERT STACKING Call Alert Stacking is an optional feature that allows you to save up to eight Call Alerts in a stack. Receiving a Call Alert with Stacking With Call Alert Stacking, you have the option to clear a Call Alert or to save the Call Alert to the queue for later recall. · To clear a Call Alert, press under "Clear". · To place the Call Alert into the queue, press under "Queue". Pressing the Mode key also stacks the Call Alert. If you receive multiple Call Alerts, the last received Call Alert displays and the remaining Call Alerts are stacked at the beginning of the queue. 1 Alert DOUG NORDEM 3 Queued Clear Queue Private Call Responding to a Call Alert in the Stack You can respond to the Call Alerts in any order. [. . . ] Regulations of the United States Federal Aviation Administration prohibit use when the plane is in the air and require that you have permission from a crew member to use your radio while the plane is on the ground. · Batteries All batteries can cause property damage, injury or burns if a conductive material such as jewelry, keys, or beaded chains touch the exposed terminals. The material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container. [. . . ]