User manual MOTOROLA IDEN NTN9298

[. . . ] ® NTN9298 Surveillance Kit User's Guide For iDEN models i1000, i2000, and all plus family products. SAFETY AND GENERAL INFORMATION Refer to your phone's user guide for all safety information relating to phone operation. To assure optimal performance when you are using the surveillance kit and to make sure that human exposure to radio frequency electromagnetic energy is within national and international guidelines, follow the instructions for proper phone usage in your phone's user guide, including positioning of the phone. To maintain optimum signal strength and to ensure compliance with FCC regulations, keep surveillance headset cables at least one inch (1") from the phone's antenna at all times. [. . . ] The Customer will not be invoiced for the replacement item if original, identical items are shipped to the Warranty Department within 45 days. DESCRIPTION The NTN9298 Surveillance Kit consists of a two-wire surveillance headset, with an earpiece and a microphone with a push-to-talk switch, and an adapter to attach the headset to your iDEN portable. This accessory permits concealed and private operation of the iDEN portable. SURVEILLANCE ADAPTER The Surveillance Adapter connects the surveillance headset to your phone for privacy and hands-free operation. The Surveillance Adapter fits onto 3 the bottom of the phone and provides standard 2. 5mm jack connection for the surveillance headset. Release Button Surveillance Adapter Release Button 2. 5mm Jack Only the 5085665C01 Surveillance headset is compatible with the Surveillance Adapter. Use of any non-Motorola approved headset with the Surveillance Adapter may damage the phone, or cause it to malfunction. Damage caused by using non-Motorola approved accessories may void your warranty. See your phone's user guide for more information. ATTACHING/DETACHING THE SURVEILLANCE HEADSET 1. Insert the 2. 5 mm plug of the Surveillance headset cord into the jack of the surveillance Adapter. Pull on the plug, not on the cord, to remove the Surveillance headset. 4 USING THE SURVEILLANCE ADAPTER AND SURVEILLANCE HEADSET 1. Hold the phone and the Surveillance Adapter facing you so that you can see the Motorola logo on the adapter. Insert the Surveillance Adapter's connector into the Bottom Accessory Connector. You will hear the connector snap into place. [. . . ] Replace the standard eartip. Model # 50-80370E90 Description Black standard earpiece assembly (earphone, earloop, eartip). Plastic urethane earloop Standard rubber eartip Surveillance Adapter Surveillance Headset 50-80370E92 50-80370E94 09-85664C01 50-85665C01 6 , Motorola and iDEN are trademarks of Motorola, Inc. All rights reserved. @6881092C04@ 68P81092C04-O [. . . ]