User manual MOTOROLA MOTOPURE H12

[. . . ] For other phones, see your phone's user's guide. TROUBLESHOOTING My headset will not charge. Make sure your earhook and ear cushions are properly orientated. See step 1 and "Ear Cushions and Your Headset" to see proper orientation. Make sure thay any devices previously paired with the headset are turned off. [. . . ] Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www. hellomoto. com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809516A34-A Bluetooth QD ID: B013132 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. All other product or service names are the property of their respective owners. Do not store headset in direct sunlight. Storing headset fully charged in high temperature conditions may permanently reduce the life of the internal battery. Battery life may temporarily shorten in low-temperature conditions. The desktop charger displays your headset for easy access at home or the office. The shirt clip secures your headset for access on-the-go. The clip can be attached to a shirt, bag, or purse strap. Features and Functions Guide TURNING H12 ON AND OFF To turn ON your H12, slide the Power switch towards the power symbol, as shown below. The indicator light first flashes blue for several seconds, then: flashes blue (if paired and connected with another device). becomes steadily blue (if ready to be paired). To turn OFF your H12, slide the Power switch off. The indicator light will turn off. IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H12. Indicator Light Power Switch EAR CUSHIONS AND YO Your H12 headset is supplied with multiple ear cushions. Your headset's performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied ear cushions with your headset. [. . . ] Therefore, we recommend trying all the supplied ear cushions with your headset. The ear cushion is fitted onto the end of your headset's earpiece speaker like shown, and placed onto your ear when using your headset. OUR HEADSET When fitting an oval-shaped ear cushion on your headset, be sure the cushion is oriented, as shown below (pointing towards the microphone). WEARING THE HEADSET To wear your headset, flex the earhook and loop it over your ear, as shown. CHANGING FOR USE ON OTHER EAR You can wear your H12 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: 1 Gently lift and pull the top of the earhook up and off speaker stem, as shown. 2 Flip the headset over. [. . . ]