User manual MOTOROLA MOTOPURE H15

[. . . ] 2 Plug the headset into the port on the desktop charger as shown. The desktop charger light is lit, and the headset indicator light turns red when the battery is charging. It may take up to 1 minute for the headset indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the headset indicator light turns green. [. . . ] The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. All other product or service names are the property of their respective owners. All rights reserved. paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To conserve power, close the boom to turn your headset off. Re-open the boom to make a call. USING A SECOND PHONE? Multipoint technology allows you to make and receive calls from two Bluetooth enabled devices like your personal and business phones. To pair a second phone to your headset, follow these steps: 1 Turn off any phones or devices that are already paired with your headset. TIPS FOR USING H15 WITH TWO PHONES Use the following tips when using H15's multipoint technology: Incoming calls can be answered from both phones: ­ When answering a call, the idle phone is disconnected from the headset. ­ When the call ends, the idle phone is automatically reconnected to the headset. Last number redial dials the last outgoing call made from the primary phone. Voice dial is accessible from either phone via different key actions: ­ For your primary device (last paired phone), tap the Call button until you hear the tone. ­ For your secondary device (other paired phone), tap the Call button and either Volume button until you hear the tone. 2 Turn off your headset by closing the headset boom. 3 Perform Step 2 ("Start Bluetooth Feature"), Step 3 ("Pair"), and Step 4 ("Test and Use") to pair your headset with your second phone. Your most recently paired phone is now your primary phone for voice dial functionality. 4 To connect to both phones, turn on first phone. 5 Close the headset boom and then re-open it. The headset automatically connects to both phones. The last paired phone is now your primary phone for voice dial functionality. USING YOUR H15 See Features and Functions Guide on the reverse side for information on using your H15 TROUBLES My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then close and reopen the headset boom. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). SHOOTING My headset will not pair with my phone. If the LED is solid blue, open the boom flip, and press and hold both Volume buttons and the Call button for about 10 seconds. The indicator light flashes (Green, Red, Blue) 3 times and then become steadily lit. [. . . ] The ear cushion is fitted onto the end of your headset's earpiece speaker like shown, and placed onto your ear when using your headset. YOUR HEADSET When fitting an oval-shaped ear cushion on your headset, be sure the cushion is oriented, as shown below (pointing towards the microphone). WEARING THE HEADSET To wear your headset, flex the earhook and loop it over your ear, as shown. CHANGING FOR USE ON OTHER EAR You can wear your H15 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: 1 Gently lift and pull the top of the earhook up and off speaker stem, as shown. 2 Flip the headset over. 3 Attach the earhook to Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort. [. . . ]