User manual MOTOROLA T5550

[. . . ] T5000 & T5500 user guide --- Pg 1 Contents Safety and General Information FCC Licensing Information Control Buttons Getting Started Installing the the AA Batteries Installing the NiCd Battery Pack Battery Meter Attaching the Belt Clip Removing the Belt Clip Turning Your Radio On and Off Setting the Volume Setting a Channel Channels and Frequencies Talking and Listening Talk Range Checking the Channel Before Transmitting 2 Special Features Interference Eliminator Code Push to Talk Timeout Timer 10 Locking the Keypad Scanning Channels 11 Advanced Scan 13 13 Alerts Channel Busy Indicator 13 Setting and Transmitting Call Tones 14 Transmitting a Talk Confirmation Tone 15 QT Noise Filtering 15 16 16 Accessories Using Audio Accessories 16 Voice Activation (VOX) 16 Setting the Sensitivity Level 17 17 Patent Information 17 Copyright Information Warranty 18 18 18 18 19 19 20 20 20 21 21 23 23 23 24 25 26 27 T5000 & T5500 user guide --- Pg 2 Safety and General Information Safety and General Information Important Information on Safe and Efficient Operation Read This Information Before Using Your Radio The information provided in this document supersedes the general safety information in user guides published prior to December 1, 2002. Transmit and Receive Procedure Y our two-way radio contains a transmitter and a receiver. T control your exposure o and ensure compliance with the general population/uncontrolled environment exposure limits, always adhere to the following procedure: · Transmit no more than 50% of the time. · To transmit (talk), press the Push to Talk (PTT) button. [. . . ] Channels and Frequencies Channel 1 2 3 4 5 6 7 8 9 10 11 Frequency 462. 5625 MHz 462. 5875 MHz 462. 6125 MHz 462. 6375 MHz 462. 6625 MHz 462. 6875 MHz 462. 7125 MHz 467. 5625 MHz 467. 5875 MHz 467. 6125 MHz 467. 6375 MHz Description GMRS/FRS GMRS/FRS GMRS/FRS GMRS/FRS GMRS/FRS GMRS/FRS GMRS/FRS FRS FRS FRS FRS Channel 12 13 14 15 16 17 18 19 20 21 22 Frequency 467. 6625 MHz 467. 6875 MHz 467. 7125 MHz 462. 5500 MHz 462. 5750 MHz 462. 6000 MHz 462. 6250 MHz 462. 6500 MHz 462. 6750 MHz 462. 7000 MHz 462. 7250 MHz Description FRS FRS FRS GMRS GMRS GMRS GMRS GMRS GMRS GMRS GMRS Getting Started 16 Getting Started 15 T5000 & T5500 user guide --- Pg 17 Talking and Listening To communicate, all radios in your group must be set to the same channel and Interference Eliminator Code. Hold the radio 2 to 3 inches away from your mouth when talking. When you finish talking, release (press to talk, release to listen). Talk Range Your radio is designed to maximize performance and improve transmission range. Do not use the radios closer than 5 feet apart. Checking the Channel Before Transmitting Your radio has multiple channels shared on a "take turns" basis. For uninterrupted communication, do not talk on a channel is someone else is currently talking on it. To check for activity on a channel before you talk, press and hold or . If you hear static, the channel is clear to use. T5000 & T5500 user guide --- Pg 18 Special Features Interference Eliminator Code Interference Eliminator Codes help minimize interference by providing you with a choice of code combinations. to save the code setting. Special Features You can set a different code for each channel using this procedure. Note: You must set the Interference Eliminator Code to on an FRS radio that uses Interference Eliminator Codes to communicate with other FRS radios that do not have Interference Eliminator Codes. Push to Talk Timeout Timer To prevent accidental transmissions and save battery life, the radio emits a continuous warning tone and stops transmitting if you press for 60 continuous seconds. Locking the Keypad To avoid accidentally changing your radio settings, press and hold for 3 seconds or until displays. You can turn the radio on and off, adjust the volume, receive, transmit, send a call tone, and monitor channels. All other functions are locked. 18 To unlock the radio, press and hold displayed. for 3 seconds or until is no longer Talking and Listening 17 T5000 & T5500 user guide --- Pg 19 Scanning Channels Use scanning to monitor channels and codes for transmissions or to find someone in your group who has accidentally changed channels. To start scanning, briefly press and release or . When the radio detects channel activity, it stops scanning and you can hear the transmission. To respond to the transmitting, press within 5 seconds. Note: If your radio's Interference Eliminator Code is set to while scanning, the radio checks for activity on each channel regardless of the code used on the channel. If your radio's Interference Eliminator Code is set to - , the radio checks for activity only on channels using codes - and ignores channels using code . Advanced Scan If the radio stops scanning on a channel you do not want to listen to, briefly press and release or to resume scanning for the next active channel. Removing Channels from the Scan List (Nuisance Delete Feature) To remove a channel so the radio does not stop on it while scanning, press and hold or for at least 3 seconds, then release. This temporarily removes the channel from the scan list. [. . . ] The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. [. . . ]